Air Circulator Therma Smooth Specimen Transfer Thermal Shock Chamber

Air Circulator Therma Smooth Specimen Transfer Thermal Shock Chamber

HD-E703 Three Zone Thermal Shock Test Chamber....

Description:

Air circulator therma Smooth specimen transferThermal Shock Chamber  is according to user requirements, design and manufacture of machine suitable for electrical and electronic products and components of high and low temperature impact test and high temperature or low temperature storage and test environment.For users of the machine (or parts), electrical appliances, instruments, materials, coating, coating, etc for the corresponding climate environment accelerated test, the sample (s) to the sample (s) or test behavior.

Meet The Standard:

GB/T2423.1 test method at low temperature;GB/T2423.2 high temperature test method;
GB/T2423.22 temperature test;GJB150.5 temperature impact test;
GJB360.7-87 temperature impact test;GJB367.2-87, 405 temperature impact test.
SJ/y73 T10187-91 series temperature test chamber SJ/y73 T10186-91 series temperature test chamber
IEC68-2-14 _ test method of GB/T2424.13 N_ temperature changes - 2002 test method for temperature change test guideline
GB/T2423.22-2002 temperature weathering test QC/T17-92 auto parts general rules
EIA364-32 thermal shock test program (temperature cycle) electric connector and socket of the environmental impact assessment

Benefits

Meets Military Standard 883 method 1010.8 with 15lbs. of product
Limit switches stop the transfer process and allow for precise product positioning
Alarm and shutdown circuit provide over/under temperature protection to ensure product safety and accurate test results
Efficient refrigeration system provides thermal capability to meet temperature stabilization times for military specifications
Value priced – water cooled vs. liquid nitrogen cooling

Features

Vertical air circulation
2” traveling port
Open-air, rapid-responding, low-mass, nichrome wire heating elements
Two zone types with hot/cold compartment setups
Cascade refrigeration system with TEV control and two semi-hermetic compressors
Vapor-tight, interior liners made of 100% continuously welded stainless steel
Fully automatic, PID chamber control through alpha-numeric display
Horizontal or vertical configurations
Ceramic insulators
Fiberglass and polyurethane insulation ensures minimal thermal transfer
Double-gasket doors provide additional insulation
Door switch
Limit switch
Dual-carriage transport system with stainless steel, wire mesh basket

Temperature Ranges:

With Single Stage Refrigeration: - 35°C to + 200°C, +/- 0.5 deg. after stabilization
With Cascade Refrigeration System: - 73°C to + 200°C, +/- 0.5 deg. after stabilization
Standard Humidity Range: 20% to 98% RH in the dry bulb range from +20°C to +85°C, limited by a dewpoint of +3°C

 Specifications 

Safety Devices 

1. Hot chamber overheat protection switch
2. Cold chamber overheat protection switch
3. Air circulator overload alarm
4. Refrigerator high/low pressure protector
5. Compressor temperature switch
6. Air pressure switch
7. Fuse
8. Water suspension relay ( water-cooled specification only)
9. Compressor circuit breaker
10. Heater circuit breaker
11. Test area overheat/overcool protector
12. Air purge valve

Daily Maintenance

1. The refrigeration system using air cooled condenser fan should be regular maintenance, removal and decontamination condenser, in order to ensure good heat transfer performance of ventilation
2, hot and cold shock me a long shutdown is not used regularly every half power, power time is not less than one hour, and related spare parts and testing equipment is functioning properly.
3, hot and cold shock box should be cleaned regularly evaporator: cleanliness levels because the test is different, in the forced air circulation effect, it will gather a lot of dust particles and other small objects on the evaporator should be cleaned regularly.
4, low-temperature chamber circulation fan, condenser fan and clean balance correction: cleaning and evaporator is similar because of different working environment chamber, circulating fan, will gather a lot of dust and other small particles on the object condenser fan should regular cleaning.
5, hot and cold shock box device To move preferably at Paddy ASHDOWN Lai instrumentation technician guidance, in order to avoid damage to the equipment, such as customer self relocation, must have a professional electrician before turning on power to confirm correct operation of the circuit, or will burned equipment related components.