Operation | Non-maintained | Input Voltage | 220V-240V 50/60Hz | Lamp type | 1w /3w White LED | Battery | Nickel-mH Battery 3.6V 1.0Ah /Ni-cad Battery 3.6V 1.8AH | Indicator | Red LED Indicates Charging | Duration Time | More than 3 hours | Construction | Electro-galvanized Steel Casing with Corrosion Resistant Epoxy
Spray Coating; PC Plate | IP Rate | IP20 | Installation | Ceiling Recessed Mounted | Weight | 0.5 kg | Working Temperature | -10℃ to 55℃ | Size | 350mm×110mm×38mm Tolerance ±0.03mm | Customization | Battery, Duration Time, Package, Wire length |
Technical Parameters: - Input Power: AC 220V-240V 50Hz / 60Hz
- Light source:3W high power LED
- Emergency time ≥180 minutes
- emergency conversion time ≤IS
- Emergency switching voltage: AC 144V-204V 50Hz / 60Hz
- Battery: Ni-mH 3.6V / 1600mA
- Installing hole size: Ф75mm
Operating Manual - Disconnect the AC power during installation.
- This product should not be installed in places such as outdoors
,humid and corrosive gas and so on.
- This product should use the separate loop-powered circuit.It should
not share circuit with lighting or other electrical equipment (with
a switch), in order to ensure this LED emergency Ceiling light can
be recharged normally.
- To ensure the product operating normally,it should be checked
regularly.
- The products have been discharged before leaving the factory.So it
needs to be charged 24 hours when used .
- If the product is in storage or not use for a long time, it should
be charged and discharged once every three months, in order to
protect the battery performance.
- Please keep this manual.
|
