Class One 8M Galvanized Electric Power Pole 3mm for 69KV Transmission Line
|
|
Class One 8M Galvanized Electric Power Pole 3mm for 69KV Transmission Line
Quick Description
Electrical Transmission and distribution pole For Electrical transmission and distribution structures Round or conical shape with height from 8m to 15m With hot dip galvanize or painted finish
Technical Data Sheet(F=10KN)
Connection Type
1. Joint Type 2. Flange Type
Flexibility, ease of installation, maintenance free, reliability . These are just some of the advantages provided by our galvanized steel monopoles over concrete or lattice structures. We design, manufacture and supply any tapered steel poles for Transmission networks.
Standard Accessory
-Top plate -Base plate -Bottom strip -Standard hole -Climbing rung -Anchor bolt -Bitumen protection -Painted marking -Removable ladder
Available Foundation Types
Direct Embedment Anchor Bolt/Base Plate Vibratory Steel Caisson
Available Finishes
Galvanized per ASTM A123 Paint over galvanized,paint over black steel Powder Coating
Standard Features of in-ground and base plate mounted
In-Ground Mounted:
12-sided pole shaft Welded top cap Mounting holes (to your specification if required) Identification plate M12 earth point 250mm above the nominal ground line M24 nut 250mm above the nominal ground line (to assist lifting) Additional in-ground corrosion protection 200mm above to 400mm below the nominal ground line Anti-sink straps Hot dip galvanised finish
Base Plate Mounted:
12-sided pole shaft (40kN to 80kN) 16-sided pole shaft (100kN & 120kN) Welded top cap Mounting holes (to your specification if required) Identification plate M12 earth point 250mm above the pole base Two lifting gussets on the base plate Anchor bolts, templates, nuts & washers Hot dip galvanised finish
Product Gallery
The information to inquiry or purchase
-Steel pole height and force -Cross arm type and length,the position to install in the steel pole -The method to fix the cross arm(use bolt to connect or use one or two template to weld in the steel pole to install the cross arm) -Safety factor of the steel pole -Wind speed -Type of climbing rung -Destination port -Other.
Design
Company Introduction:
Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Company has 24 years experience on producing the steel poles including the transmission power pole,street light pole,high mast pole and so on. We exported to oversea countries since 1991 and our products have been delivered to more than 70 countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa and so on.
|
||||||||||||||||||||||||||||||||||||||||
| Product Tags: metal power poles electric utility poles |
|
High-Strength Q460 Octagonal Hot-Dip Galvanized Steel Pole for 69kV Power Transmission Lines |
|
80FT 2000kg breaking load HDG customized burial type steel poles |
|
Hot Dip Galvanized Steel Power Pole with 15 Years Warranty and 160 Km/Hour Wind Speed for Electricity Distribution |
|
80FT 90FT 1400kg bitumen 5mm electrical power pole for power transmission |
|
45ft Steel Power Pole with Hot Dip Galvanizing and Epoxy Coating for Long-lasting Protection in Any Terrain |
|
132KV High Voltage 15m~30m Steel Power Pole Hot Dip Glavanized Transmission Electrical |
