12M Galvanized Electric Power Pole Q345 Material for 110KV Transmission

 12M Galvanized Electric Power Pole Q345 Material for 110KV Transmission

 Specifications:

 The followed design is based on ASTMA 572 Gr 65 material,with octagonal cross section shape,while the  safety factor is 1.8.If you have other requirement on load,height,material and cross section shape,pls  contact us.

 Description:

 Standard Accessory

 -Top plate

 -Base plate

 -Bottom strip

 -Standard hole

 -Climbing rung

 -Anchor bolt

 -Bitumen protection

 -Painted marking

 -Removable ladder

 The information to inquiry or purchase
 -Steel pole height and force
 -Cross arm type and length,the position to install in the steel pole
 -The method to fix the cross arm(use bolt to connect or use one or two template to weld in the steel pole  to install the cross arm)
 -Safety factor of the steel pole
 -Wind speed
 -Type of climbing rung
 -Destination port
 -Other.

Technical information-Cross Arm

 The above listed is the most frequently used design,and is made from angel steel.And the cross arm will  be fixed to the pole shaft connecting by bolts through the pre-drilling holes on both the cross arms and  the pole shaft.If you have any other requirements on the design,material and connecting method for  cross arm,pls contact us.

 Company Introduction:
 Jiangsu Milky Way Steel Poles which established on 1991 is located in Wuxi,East of China ,near one of  the largest sea port of China ,Shanghai,Port .
 Our Company has 24 years experience on producing the steel poles including the transmission power  pole,street light pole,high mast pole and so on.
 We exported to oversea countries since 1991 and our products have been delivered to more than 70  countries and areas ,including America,Australia ,Russia ,Germany ,Span,Philippines ,Malaysia,Africa  and so on.
 We are the supplier of many big project in many countries,like the street light pole of Dubai Tower.the  high mast pole for Sochi Winter Olympic Game and so on.