Electromechanical Arm Barrier With Tyre Killer ( Surface Mount )

GENERAL DESCRIPTION

Electromechanical tire killer with arm barrier is one of the highest security vehicle access control systems in which a vehicle without permission cannot enter. Tires of the unpermitted vehicles explode immediately, therefore the vehicle moves only a few more meters and stops. The product stops vehicles coming from both directions. Teeth of tire killer move all together. The drive unit is placed to one end of the tire killer, it stands above the ground level. The arm barrier, which is connected to the drive unit, is another safety feature. It is a mechanism that allows the passage of vehicles by working together with tire killers.

Sinomatic series surface mount electromechanical arm barrier with tire killers are suitable solutions which is not possible to dig into the ground. The barrier with tire killer does not have any depth. It can be placed to ground directly if the ground is strong enough.

CONTROL ELECTRONICS

Sinomatic Electromechanical tire killer with arm barrier is controlled with the help of advanced microelectronics. The barrier works with 100-240 VAC, 50-60Hz. Every kind of radio control receiver cards, safety photocells, open/close buttons, loop detectors, flashing lights, etc. can be integrated into the control electronics easily. Closing the barrier can be utilized by the automatic time delay facility, as well as inputs from other sources. Control electronics are mounted in an IP 67 proof plastic box, as most of the installations are made outdoors.

CABINET

Barrier cabinet is designed to IP 54. Body front lid and the top lid is manufactured from galvanized steel. The cabinet is painted to RAL color and then furnaced. There is also locking mechanism in the front lid of the cabinet.

PRODUCT SPECIFICATIONS

Feature & functions

1. Firm and anti-collision. The tyre killer body and spikes are made of 10mm thickness standard A3 carbon steel with strong load-bearing and destructive power.The structure is firm and durable.

2. IP68 military protection standard. 

3. Speedy and Low noise.The hydraulic tyre killer is hydraulically powered through both the raise and lower cycles, taking much less time and lower level of noise to operate.Typical operating (opening /closing) time is 1-2 seconds.

4. Safe and Reliable.Single phase drive motor, or a three phase motor to allow very high frequency of operation. This is ideal for large car parks or busy sites. Environment protection, low power consumption and high reliability.

5. Flexible control method, The system support remote control and drive-by-wire typically. For remote control, the controller is available to work 30 meters far away from the blocker device(depends on the radio communication environment on site).

6. Back up solution,Support manual operate mode,the spikes can lift or fall on level place by manual when power-off.

7. Convenient maintenance. It is easy to check, test and fix the problem.

8. Functional and Manageable: Safety accessories like photocells, inductive loop detectors , beam sensor can be integrated to the system very easily.

9. It can be installed with other access control elements (for example bollards, road barrier ,turnstiles,fire alarm system,traffic light) in order to achieve an access control check-point at the highest level of security.

10. Wide range of optional configurations: Can be custom designed to suit your requirements and can be built in an almost infinite range of thickness and length to suit any roadway or level of security.

FAQ

Q1. What is your terms of payment?

A: T/T, E-checking, West Union, Credit card etc. 50% deposit, and 50% before delivery. 

Q2. How about your delivery time?

A: Generally, it takes 5 to 7 days after receiving your advance payment for sameple. The specific delivery time depends on the customized requirements and the order quantity.

Q3. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. 

Q4. What is your sample policy?

A: We can supply the sample but need to charge.

Q5.How about your after-sale service and warranty?

A:We provide lifelong after-sale service and technical support, one year warranty. Please always feel free to contact us if you meet any problems

Q6.How to install and maintain the equipment?

A:Our professional engineer will help provide draft construction design according to your specific on site condition. Related installation video show can also be provided.