311 - 320 of 1811
non destructive testing calibration block
Selling leads
|
ISO 3452-3 Type 2 reference block Core purpose ·Type 1 reference test block: used to determine the sensitivity level of the penetrant product series ...
2026-03-06 07:30:17
|
|
HBW Hardness Test Blocks for Brinell Durometer Hardness Test Blocks Brinell block (180-650)HBW 10/3000 Ф90×Ф12×16 or 60×40×10/ 0.85kg USD18 (180-650...
2026-06-01 19:31:31
|
|
Viewing Light Density Film with Calibration certificate The core parameters of the film density viewer need to be focused on, including brightness, ...
2026-03-03 07:30:17
|
|
NDT Magnetic Flaw Detector Accessories Dead Weight test Block N1 The magnetic particle lifting force test block is used to verify the lifting force of ...
2025-11-19 00:24:19
|
|
NDT penetrant comparator block Core purpose ·Type 1 reference test block: used to determine the sensitivity level of the penetrant product series ...
2026-03-06 07:30:17
|
|
Sensitivity level determination block ISO 3452-1 Type 1 Test Panel Detection sensitivity: Evaluate whether the penetrant can detect minor defects by ...
2026-03-06 07:30:17
|
|
PT specimen Reference Test Block Type II ISO 3452-3: 2013 describes two types of reference blocks - Type 2 reference blocks are for routine assessment ...
2024-12-09 23:16:19
|
|
MTU-3 MPI Reference Block Type 1 (EN ISO 9934-2:2002) for Magnetic Particle Sensitivity EN ISO 9934-2:2002 Cracked Test Piece for the Evaluation of ...
2026-03-18 00:31:18
|
|
PSM-5 Five point Fluorescent Penetration Test Block The five point test piece is used to verify the sensitivity of the penetrant and the accuracy of ...
2024-12-16 14:30:17
|
|
Eddy Current Crack Standards Test Block 1,Please wear gloves when using the product. 2,Do not knock on the products. 3,Use the eddy current probe to ...
2026-01-13 00:33:13
|