Wall-mounted FM200 Automatic Fire Suppression System

Wall-mounted FM200 Automatic Fire Suppression System

Product Description:

FM200 (HFC-227ea) is a colourless, odourless, non-corrosive, and non-conductive clean agent that leaves no residue after discharge. It has zero Ozone Depletion Potential (ODP), making it an environmentally friendly fire extinguishing solution. These unique properties make it particularly suitable for protecting high-risk areas where electrical fires are likely to occur.
 

Activation Methods:

Temperature Control (Thermal Activation)
This fire extinguishing controller relies on the valve's temperature‑sensitive glass bulb. During a fire, when the temperature reaches approximately 68°C, the bulb automatically ruptures and releases the fire extinguishing agent.

Electromagnetic Control (Electric Activation)
Electromagnetic control is available in two modes: automatic and manual.

Automatic Mode:

The controller is equipped with both a smoke detector and a fixed‑temperature heat detector. A control mode selector is provided on the controller.

• When the selector is set to the "Automatic" position, the system operates in automatic mode.
• If only one detector generates a fire signal, the controller will emit an audible and visual alarm to notify personnel of an abnormal condition, but will not activate the fire extinguishing device.
• If fire extinguishing is confirmed necessary, press the "Emergency Start Button" to manually activate the system.
• When both detectors simultaneously emit fire signals, the controller:
  1.ounds audible and visual alarms to warn personnel and prompt evacuation
  2.Issues linkage commands to shut down fans, fire dampers, and other connected equipment
  3.After a preset delay (typically 30 seconds), issues a fire extinguishing command, activating the solenoid valve and container valve to release the agent
• If activation is no longer required during the alarm delay period, press the "Emergency Stop Button" (located outside the protected area or on the control panel) to cancel the extinguishing command.

Manual Mode:

• When the selector is set to the "Manual" position, the system operates in manual control mode.
• If fire detectors generate an alarm signal, the controller will emit audible and visual alarms but will not activate the extinguishing device.
• After personnel have visually confirmed a fire, they can press the "Emergency Start Button" (outside the protected area or on the control panel) to activate the system and release the agent.
• The alarm signal will continue until manually reset.

Important Note: Regardless of whether the system is in automatic or manual mode, pressing any emergency start button will immediately activate the fire extinguishing device and release the agent. The controller will then enter the fire extinguishing alarm state.
Packaging and Shipping for Inert Gas Fire Suppression System
Packaging:

The FM200 fire suppression system is carefully packaged to ensure safe delivery and handling. The packaging includes:

• Heavy‑duty cardboard box
• Bubble wrap
• Protective foam inserts
• Instruction manual

Shipping:
We offer worldwide shipping for our FM200 fire suppression system. All shipments are sent via reliable and trusted courier services to ensure timely and secure delivery. Customers will receive a tracking number by email once their order has been shipped.

Special Handling Instructions:
If your shipment requires any special handling instructions, please contact us at least 24 hours before dispatch. We will do our best to accommodate your request.

Why Choose Us