131 - 140 of 162
pressed in brass coil heater
Selling leads
|
... and a Stainless Steel outer sleeve. The heater is tightly sandwiched between these sleeves eliminating the heat transfer problems associated with ...
2024-12-09 12:00:32
|
|
... steel sheath. Mostly double head heater is used for heating up solids such as injection presses heating plates or various tools, double head ...
2024-12-09 13:10:09
|
|
...thermocouple are also available. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer ...
2024-12-09 12:05:21
|
|
customizable electric band element electric band heater brass nozzle heater Description: 1) Nozzle & Band heaters are are used in plastic processing ...
2024-12-09 12:06:50
|
|
Heating element Electric Band heater Brass Nozzle Band Heater for injection moulding machine Description: 1) Mica band heaters are widely used on ...
2024-12-09 12:01:41
|
|
....7mm,with k type thermocouple and ground wire, with 5 feet black kevlar sheath and fully black XLR male plug The flat coil heater: 110/120V,100W...
2024-12-09 11:31:13
|
|
12V Nozzle band heater with built in ktype thermocouple in brass for hot runner Description: 1) Terminal box that connect the heater 2) Flexible armor ...
2024-12-09 11:42:14
|
|
..., can eliminate known problems associated with the casting process. The machined path in the brass for the heater enables exact repeatability of ...
2024-12-09 13:05:14
|
|
..., can eliminate known problems associated with the casting process. The machined path in the brass for the heater enables exact repeatability of ...
2024-12-09 13:07:45
|
|
... problems associated with the casting process. The machined path in the brass for the heater enables exact repeatability of heat profile. By never ...
2024-12-09 20:18:51
|