51 - 60 of 226
microtubular resistance injection molding heater
Selling leads
|
...Heater With Brass Core SS Steel Sleeve For Injection Molding 1. Brief Introduction The Hotlock Nozzle Coil Heater are constructed with a Brass core ...
2024-12-09 13:05:39
|
|
... sleeve. The materials used direct the heat inward toward the nozzle resulting in a very efficient heater with even heat distribution. The tightly ...
2024-12-09 13:07:45
|
|
.... Compared with the same heating element of high thermal, cartridge heater can save 5% of electric materials, and heat efficiency can reach 90%. ...
2024-12-09 11:02:10
|
|
...thermocouple are also available. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer ...
2024-12-09 12:05:21
|
|
... for use in hot runners systems for plastic industries and many other thermal processes, where ever high electrical heating performance is required ...
2024-12-09 12:29:30
|
|
Hot Runner Mini Heater With Thermocouple,Mini Coil Heaters For Injection Molding Machine Brass Coil Heater Description: Coil heater is one kind of ...
2024-12-09 13:05:14
|
|
...heaters for Plastic Extruder injection molding Machine Description: 1) Ceramic Insulated Band Heaters conserve energy by using a 1/4" thick ceramic ...
2024-12-09 11:40:33
|
|
...Mini / Micro Coil Heater For Injection Molding Nozzle Heating Description Axial clamp mini coil heaters are a proven performer for high cavitation ...
2024-12-09 13:35:14
|
|
Electric Cast Aluminum Heaters for Injection Molding Description The cast in heaters are composed of one or more electrical heating elements embedded ...
2024-12-09 11:02:10
|
|
Electric Die Cast Aluminum Heater For Plastic Extrusion Machine / Injection Molding 1. Description The cast in heaters is one kind of electric heating ...
2024-12-09 11:02:10
|