21 - 30 of 179
injection molding fog machine heater
Selling leads
|
... to high watt density cartridge heaters,our production length in 400-3000mm is mainly used for hot runner mold ,as well as other precision heating ...
2026-03-30 11:55:38
|
|
...Heaters For Hot Runner System / Injection Mold 1. Product introduction GME pressed in brass coil heaters deliver the benefits of cast in brass coil ...
2026-03-30 11:55:38
|
|
... problems associated with the casting process. The machined path in the brass for the heater enables exact repeatability of heat profile. By never ...
2026-03-30 11:55:38
|
|
...heaters for Plastic Extruder injection molding Machine Description: 1) Ceramic Insulated Band Heaters conserve energy by using a 1/4" thick ceramic ...
2026-03-30 11:55:38
|
|
.... The watt density can reach 25 W/cm2and the operating temperature can go up to 800°C (1472°F) 2.The cartridge heater is filled with magnesium ...
2026-03-30 11:55:38
|
|
...Injection Molding Coil Heaters with Stainless Steel Bushings are engineered for high-performance thermal transfer in demanding industrial ...
2026-03-30 11:55:38
|
|
Stainless steel Hot runner system spring coil heater for plastic injection mold Description: Coil heater is mainly used for hot runner mold or, as ...
2026-03-30 11:55:38
|
|
...thermocouple are also available. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer ...
2026-03-30 11:55:38
|
|
...heater custom hot runner nozzle heater for injection mold Description: Hot runner nozzle heaters are made of nickel chrome resistance wire placed ...
2026-03-30 11:55:38
|
|
... inside chrome nickel steel tube filled with MgO powder and compacted for faster and efficient heat transfer. The hot runner heaters are annealed ...
2026-03-30 11:55:38
|