201 - 210 of 273
injection mold hot runner nozzle heater
Selling leads
|
... Heater For Injection Molding Nozzle Heating Description Axial clamp mini coil heaters are a proven performer for high cavitation applications ...
2024-12-09 13:35:14
|
|
...Heater For Hot Runner Molding With PTFE Leads 1. Introduction GME is one of the reputed manufacturers of Pressed in Brass Coil Heater all over the ...
2024-12-09 12:00:32
|
|
Hot runner brass pipe heater nozzle heater pressed with coil heater Description: Brass band heater is mainly composed of brass tube to seal the ...
2024-12-09 13:20:43
|
|
High Quality Hot Runner Spring Coil Nozzle Heater With Thermocouple Description: 1) Cross section specification: 3.0 x 3.0mm, 3.30 x 3.30mm, 3.5 x 3...
2024-12-09 13:23:29
|
|
High Accuracy Multi-zone Temperature Controller for Heating System 1. Description: This controller is ideal for regular molding machines without ...
2024-12-09 11:02:10
|
|
Electric Resistance Axial Clamp Band Coil Heater with Thermocouple Type K for Hot Runner System Description: This series is variety of different ...
2025-03-31 13:24:40
|
|
... heaters. We also have been certificated by ISO9001and CE in coil heaters, band heaters and immersion tubular heaters. 2) We provide Mica Nozzle ...
2024-12-09 11:39:37
|
|
...hot runner manifold tubular heater heating element Specification: Flanged immersion heaters consist of hairpin bent tubular elements welded or ...
2024-12-09 21:57:54
|
|
...Hot Runner Manifold Tubular Heater Heating Element Specification: Flanged immersion heaters consist of hairpin bent tubular elements welded or ...
2025-01-08 16:46:35
|
|
... steel sheath, their watt density can reach 25 W/cm2 and their operating temperature can go up to 800°C (1472°F) 2) Mostly cartridge heater is used ...
2024-12-09 11:40:33
|