161 - 170 of 333
thick wall concentric reducer
Selling leads
|
...thickness from 0.049 inch (1.24mm) to 0.15 inch (3.81mm). The maximum outer diameter of ASTM A270 TP316L tubing is 12 inch (316L.8 mm). ASTM A270 ...
2025-07-21 00:01:41
|
|
...thickness from 0.049 inch (1.24mm) to 0.15 inch (3.81mm). The maximum outer diameter of ASTM A270 TP316L tubing is 12 inch (316L.8 mm). ASTM A270 ...
2025-05-06 20:39:44
|
|
... tube, the wall thickness of the finned tube, the fin pitch, the thickness of the fins and the height of the fins. The low finned tube mainly ...
2025-05-06 21:08:49
|
|
...mainly the inner diameter and outer diameter of the fin tube, the wall thickness of the fin tube, the pitch of the fin tube, the thickness of the ...
2025-05-06 21:11:54
|
|
... (Note 1), arch and stay tubes, and superheater tubes. NOTE 1 — This type is not suitable for safe ending by forge welding. The tubing sizes and ...
2025-05-06 21:04:09
|
|
...tube, fins with a particular geometric form without removing material; this plastic deformation causes an increment of heat exchange efficiency, ...
2025-07-21 00:01:43
|
|
... and by increasing the straight flange to the depth of dish will result in the inside height. Elliptical heads are an economical solution for ...
2025-05-06 21:19:25
|
|
... more than 80000 tons of stainless steel seamless pipe and tube. Our client already cover more than 45 countries. 1.1 This specification covers ...
2025-05-06 20:56:20
|
|
...-Exchanger, and Condenser Tubes 1.1 This specification covers nominal-wall-thickness welded tubes made from the austenitic steels listed in Table 1...
2025-07-20 20:00:10
|
|
..., Heat-Exchanger, and Condenser Tubes 1.1 This specification covers nominal-wall-thickness welded tubes made from the austenitic steels listed in ...
2025-05-06 20:47:40
|