91 - 100 of 1721
heat exchanger fin tube a106
Selling leads
|
...tubes with fins on the outside surface. The fins help to increase the surface area of the tube, which increases the heat transfer coefficient and ...
2025-05-06 21:09:37
|
|
... Quick Detail: General L-type production capacity General specifications of L type fin tubes Finning Facility: 7 finning machines; Daily capacity ...
2025-05-06 21:07:13
|
|
... to 18,000 mm. Fin height: max. 16.5mm. Fin thickness: generally 0.4mm~0.6mm Fin Pitch: 2.1 mm minimum (12FPI) Surface Protection: Both exposed ...
2025-05-11 09:38:11
|
|
...Fin Extruded Finned Tube With L Type For Heat Exchanger ASTM A179 Finned tube is a heat exchange element. In order to improve heat exchange ...
2025-05-11 09:38:06
|
|
... fin tape or copper fin tape folded into an L-shaped spiral under tension and wrapped tightly around the outer surface of the base tube. It is ...
2025-07-26 00:01:30
|
|
... surface area (or internal surface area) of the heat exchange tube is usually increased by adding fins on the surface of the heat exchange tube, so ...
2025-05-11 09:35:46
|
|
...Tube With Alumium Fins, Embedded G Type Finned Tube For Heat Exchanger ASTM A179 Finned Tube is a heat exchange element. In order to improve the ...
2025-05-06 21:08:57
|
|
... to tube surface by HFW. It can improve heat transfer efficiency much more than bare tube. Due to the tight welding of the fins to the base tube, ...
2025-05-06 21:08:09
|
|
...Finned Tube With Aluminium Fin For Air Cooler Finned tubes are a type of heat exchange element. To improve heat exchange efficiency, fins are ...
2025-05-06 21:09:54
|
|
...Fin Tube For Medical sterilization equipment What is fin tube ? Finned tube is a heat exchanger element. In order to improve the heat exchange ...
2025-05-06 21:11:56
|