1351 - 1360 of 1712
heat exchanger component tubesheet
Selling leads
|
... or pins attached to its outer surface. The studs are typically made of a different metal or alloy than the base tube, providing specific benefits ...
2025-05-06 21:10:35
|
|
...A213 / ASME SA213 Gr T9 Ferritic Alloy Steel Seamless Tube for Boiler and Heat Exchanger T9 alloy steel tubes are known for their exceptional heat ...
2025-05-06 21:03:40
|
|
..., and has excellent cold and hot processing performance. ASTM A213 T5 alloy steel seamless tube is widely used in industrial heat exchangers in ...
2025-05-06 21:05:45
|
|
... with low fins on the outer surface, which increases the surface area for improved heat transfer efficiency. This type of tube is commonly used in ...
2025-05-06 21:10:46
|
|
.../ALLOY STEEL Fin tube L type is a type of heat exchanger tube that has fins attached to the outer surface. These fins increase the surface area of ...
2025-05-06 21:10:51
|
|
... surface of the tube. The G type fin tube is named after its distinctive fin shape, which resembles the letter "G". This shape provides an ...
2025-07-14 00:01:34
|
|
... heat exchangers. The embedded G-fins on the tubes increase the surface area of the tubes, which improves the heat transfer efficiency of the tubes...
2025-05-06 21:11:11
|
|
... studs or pins increase the surface area of the tube, allowing for improved heat transfer efficiency. The studs are typically welded or brazed onto ...
2025-05-06 21:11:45
|
|
... steel strip directly welded to tube surface by HFW, which can improve heat transfer efficiency much more than bare tube. Fin type have Serrated ...
2025-05-06 21:11:52
|
|
..., particularly in HVAC (Heating, Ventilation, and Air Conditioning) systems. This technology involves the integration of thin, finned tubes into a ...
2025-05-06 21:12:25
|