1211 - 1220 of 1727
engineering tubular heat exchanger
Selling leads
|
...-Exchanger, and Condenser Tubes 1.1 This specification covers nominal-wall-thickness welded tubes made from the austenitic steels listed in Table 1...
2025-05-06 20:55:02
|
|
...heat exchanger tubes that are made from the 321 austenitic stainless steel. The SA 213 specifies pipe products for heat exchangers in different ...
2025-05-06 21:03:16
|
|
...heat exchangers are a type of surface heat exchanger. They are composed of finned tubes made of carbon steel, stainless steel, copper alloys, and ...
2025-05-06 21:09:35
|
|
...Heat Exchanger Tube Chemical Composition Grade C M P S Si SA192 0.06–0.18 0.27–0.63 Max0.025 Max0.025 Min0.1 ASTM A192 Seamless Tube Core ...
2025-07-12 00:14:12
|
|
...crucial. These tubes have a specific fin design that enhances their efficiency in transferring heat between two mediums. The fins improve the ...
2025-05-06 21:07:16
|
|
...heat cycle efficiency. Suitable for boiler feed water heater and low pressure heater. Petrochemical industry: Heat exchangers used in refineries to ...
2025-07-12 00:14:12
|
|
...Heat Exchanger Tube ASTM A179 Embedded G Type Finned Tube is a type of heat exchanger tube where the fins are embedded into the wall of the tube. ...
2025-05-06 21:09:00
|
|
...t have serrated/rippled fins on the outside surface. These fins increase the heat transfer efficiency of the tube by creating turbulence in the ...
2025-05-06 21:10:00
|
|
...heat exchange equipment. Compared with ordinary seamless steel pipes, Stainless Steel Corrugated Tube has a larger heat exchange area, smaller tube ...
2025-05-06 20:37:45
|
|
... in heat exchangers, air-cooled heat exchangers, and other industrial applications where enhanced thermal conductivity is essential. It combines ...
2025-07-03 00:40:03
|