761 - 770 of 831
asme sa105 heat exchanger components
Selling leads
|
ASME SA213 T12 LOW ALLOY HFW FIN TUBE FOR BOILER ASME SA213 T12 is a specification for seamless ferritic and austenitic alloy steel boiler, superheate...
2025-05-06 21:10:43
|
|
...heat cycle efficiency. Suitable for boiler feed water heater and low pressure heater. Petrochemical industry: Heat exchangers used in refineries to ...
2025-07-12 00:14:12
|
|
...Steel Boiler, Superheater and Stainless Steel Heat Exchanger Tubes. ASTM A249 / A249M:Standard Specification for Welded Austenitic Steel Boiler, ...
2025-08-04 00:01:26
|
|
...-Exchanger, and Condenser Tubes 1.1 This specification covers nominal-wall-thickness welded tubes made from the austenitic steels listed in Table 1...
2025-05-06 20:55:02
|
|
...ASME SA213 T11 Studded Fin Tube ,Steam Reforming Furnace YUHONG GROUP Studded tube is mainly used in petrochemical and coal chemical industry for ...
2025-05-06 21:11:36
|
|
...ASME SA213 T11 A106 GR.B Studded Fin Tube ,Steam Reforming Furnace YUHONG GROUP Studded tube is mainly used in petrochemical and coal chemical ...
2025-05-11 09:38:22
|
|
.... They are designed to enhance heat transfer efficiency by increasing the surface area available for heat exchange. Here's an overview of their key ...
2025-05-06 21:13:06
|
|
...Heat Exchanger Overview HFW (High-Frequency Welded) Fin Tubes are heat exchanger components consisting of a base tube with externally welded fins. ...
2025-05-06 21:13:08
|
|
ASTM A179/ ASME SA179 CARBON STEEL SEAMLESS U BEND TUBE BLACK PAINTING / COLD DRAWN Main ASTM A179 (ASME SA179) cold drawn steel tube: This is an ...
2025-05-06 20:51:39
|
|
...Heat Exchanger Tube Chemical Composition UNS Designation Ni Cu Iron Mn C Cr Ti Al N08810 0.30–0.35 0.75 39.5 1.5 0.05–0.10 19.0-23.0 0.15-0.60 0.15...
2025-07-12 00:14:12
|