5kw 10kw Pipe Welding PWHT Machine Induction Heater
|
|
Induction heater/induction heating machine is designed and manufactured by Canroon used for pipes PWHT/post weld heat treatment (DHT dehydrogenation heat treatment, ISR intermediate stress relief), widely applied and welcomed by oil&gas piping, offshore platform construction, and power plant construction & repair. portable one has 5kw, 10kw, It is small in size, easy to take, and convenient to operate.
Suitable pipes size: When applied in pipe post weld heat treatment/PWHT, 5kw induction heater is suitable for pipe size with diameter of less than 200mm and thickness of less than 25mm, 10kw induction heater is suitable for pipe size with diameter of 200-400mm and thickness of less than 30mm, heating temperature should be lower than 788℃, fast and uniform heating.
Besides, application of welding preheat, joint anti-corrosion coating and shrink fitting are also very efficient.
Details of Canroon portable induction heater/induction heating machine: Front:
Back: Technical parameters of induction heater/induction heating machine for PWHT:
Application details of induction heater/induction heating machine in pipes PWHT(post weld heat treatment):
Accessories of induction heating machine:
We offer multiple accessaries like thermocouple, thermocouple welding machine, digital temperature-recorder, remote switchgear, output extension cable, insulation blanket, etc. Complete solution saves your time and ensures you to start work soon after received our delivery.
Features of portable induction heating machine:
We have display board to show working parameters, and temperature recorder can feedback PWHT curve, you can print it.
The interface offers two basic control mode to choose including temperature control and power control. The former one has 4 modes of preheat, bake-out, PWHT, custom. The last one has 2 modes ofconstant power and power VS time. Each mode offers different parameters to set. Thus brings the benefit of wide applicability and precise control.
Fault codes will display and be recorded for reference, and system will respond with protection action like shutdown once fault occurs such as open-loop output or short out.
Due to modular design, the maintance will be easy and low-cost.
Once fault occurs, CR2000 will act with display of fault code, which was detailed explained in the manual book.
This uniquely energy-efficient process converts up to 90% of the expended energy into useful heat, and time-to-temperature is faster than conventional processes due to the method of applying heat, reducing cycle time.
The heat is induced within the part itself by alternating electrical current, thus uniform temperature throughout the heating zone is realized. |
||||||||||||||||||||||||||||
| Product Tags: 10kw PWHT Machine Pipe Welding PWHT Machine 5kw Handheld Induction Heater |
|
PWHT Machine Integration 24-36A Input Current and 788C Temperature Control with Infrared Sensor or Thermocouple |
|
Digital Control Model Induction Heating Machine for PWHT Output Frequency 3-15KHz |
|
5KW/10KW Pipe Welding PWHT Machine - Induction Heater for Pipeline Heat Treatment |
|
5KW 10KW Induction PWHT Equipment for Pipeline Welding Heat Treatment Process |
|
Portable PWHT Machine 5KW 10KW - Induction Heater for Welded Pipe Stress Relieving |
|
5kw 10kw Pipe Welding PWHT Machine Induction Heater |