Remote Control Car Parts Obstacle Avoidance Sensor 2cm - 40cm
Distance
Description:
1.induction into the object output0output, not sensed by1, can be
directly related to 3V and 5V chip IO port
2. induction distance of 2 to 40 cm, distance, anti-interference
ability is good. ( Note: infrared sensor is not detected in all the
objects can be the same as the distance of the objects with
different colors, the reflection of light of different objects, the
deeper the color closer to black detection distance is shorter, the
sensor is2 to40 per cent
Rice is the white wall measurement. )
3.speed, suitable for vehicle intelligent obstacle avoidance, black
and white line tracking, fall protection, product counter, line
cutting, liquid level detection.
4.by this sensor to produce black-and-white line tracing car
without in the white line on the run, in the cement, Wong complex
environment of black guard trace. As long as the black line around
the color slightly shallow than black can be, the elimination of
the traditional way, make the layout of the environment more simple
5.sensor3 to6V power supply, range wide, suitable for 3V and 5V
single chip microcomputer system.
6.with enable end, EN is equal to"1" when the sensor does not work,
is equal to "0" when the work. Sensor cap plug EN end jump after
long-term ground ( EN term for"0" ). To use the EN end cap please
jump off.
7 .frequency adjust potentiometer is used to adjust the infrared
emission tube carrier frequency, because the integrated receiver in
specific38KHZ carrier frequency when it is the most sensitive.
The502 resistor clockwise to do ( is also launching tube at maximum
brightness ), and then at the white wall103resistance, have been
transferred to the induction distance is the most so far, such that
the sensor can work in optimum state.
Competitive Advantage:
1. Convenient & Friendly Customer Service
2. Low Prices Direct From Factory Suppliers
3. Fast Delivery Around the World.
4. High Quality With Global Standards.
5. 1 Year Factory Warranty
6. Safe Shipping Way and Payment
