10A Transformer Thermal Fuse 172 Degree / Thermal Cut Out Fuse

Rated functioning temperature(Tf):

The temperature at which a Thermal Fuse changes its state of conductivity to open circuit detection curret.The tolerance according to IEC60691 is from +0 to-10℃.(With Japan Electrical Appliance and Material Law,on the other hand,they must function in the tolerance range of ±7℃.).

Fusing(cut)-off temperature:

The fusing-off temperature indicates value measured in silicon oil with a temperature increased by 0.5-1℃ per minute and a detective current 10mA or less.

Holding temperature(Th):

The maximum temperature at which a thermal Fuse will not cause a change in state of conductivity to open circuit while conducting rated current for 168 hours. This rating is required by safety standards based on IEC60691.

Maximum temperature limit(Tm):

The maximum temperature at which a Thermal Fuse can be maimtained for 10 minutes without reclosing.This rating is requirde by safety standards based on IEC60691.

Rated current(Ir):

The allowable maximum current which a Thermal Fuse is able to carry.

Rated current(Ur):

The allowable maximum voltage which a Thermal Fuse is able to be applied.