Home Appliances Ntc Thermistor Temperature Sensor For Computers And Printers

Mechanical characteristics
 

1. Resistance to soldering heat
The terminals shall be dipped in to a soldering bath having a temperature of 260±5°C to a point 2.0 mm from the body and then be held there for 5 ±1s, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.

2. Solderability
After dipping the terminal to a depth in a soldering bath of 235±5°C for 2

±0.5s .Approximately 90% of terminals should be covered with solder

uniformly.

3. Free fall

After three times fall to a maple board from 0.75 m high, there shall be no visible damage and the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.

4. Robustness of terminations
After 1N loading weight for 10 ± 1s was applied to the wire terminations, there shall be no visible damage and the change ratio of the rated zero-power resistance shall be within ±1% of the initial
value.