Epoxy Resin Coating Stack Flue Sensor

Browse Categories

Guangdong Uchi Electronics Co.,Ltd

City: dongguan

Province/State:guangdong

Country/Region:china

Tel:86--18925858717

Contact Person:
Miss.Anna View Contact Details

Epoxy Resin Coating Stack Flue Sensor

Brand Name	UCHI
Model Number	NSAB1802JD8-650T2I
Certification	ROHS
Place of Origin	CHINA
Minimum Order Quantity	500PCS
Price	6-9 USD / Pieces
Payment Terms	T/T, Western Union
Supply Ability	150,000PCS Per Month
Delivery Time	7-10 Days
Packaging Details	Bulk, unit weight:20g
Name	Stack Flue Sensor
Part Number	NSAB1802JD8-650T2I
Universal PN	42002-0024S
Element	R200:8KΩ ±5% R150/250:5300K ±3% DDR
Cable	TPEF AWG22*1C 320℃
Coating	Epoxy resin
Housing	JM19105 Φ6.35*54.6+S13+24UNF SUS304
Terminal	AMP 250 #22-#18
Operating temp.range	-30~+300C
Cable length	65mm

Detailed Product Description

Pentair 42002-0024S Stack Flue Sensor Replacement NTC Temperature Sensor For Pool and Spa Heater Electrical Systems

Specification download link : NSAB1802JD8-650T2I SPEC.pdf
Installation method download link : Stack Flue Sensor Insulation.pdf

Description

A stack flue sensor, located on the exhaust elbow of a pool heater, prevents the flue gas output from exceeding 500°F. When this fails, your system will show error codes E05 or E06 to indicate that the stack flue sensor must be replaced.

This replacement stack flue sensor from Optimum Pool Technologies is compatible with Pentair’s MasterTemp, Max-E-Therm, and other Pentair Sta-Rite heaters. It is designed specifically to replace the Sta-Rite heater stack flue sensor.

Location:The Indoor Stack Flue Switch (ES2)/Stack Flue Sensor (SFS) Is Located on the Exhaust Elbow.

Dimension (mm)

NO	COMPONENT	MATERIAL AND SPECIFICATIONS	Q'TY	REMARK
2-1	ELEMENT	R200:8KΩ ±5% R150/250:5300K ±3% DDR	1 PCS
2-2	LEAD WIRE	TPEF AWG22*1C 320℃	65mm	(White )
2-3	COATING	Epoxy resin		(Black)
2-4	HOUSING	JM19105 Φ6.35*54.6+S13+24UNF SUS304	1 PCS
2-5	TERMINOL	AMP 250 #22-#18	2 PCS	(Red)

Performance

NO	Item	Sign	Test Conditions	Min.		Normal value		Max.	Unit
4-1.	Resistance at 200℃	R200	Ta=200±0.05℃ P_T≦0.1mw	7.6	8		8.4		kΩ
	Resistance at 150℃	R150	Ta=150±0.05℃ P_T≦0.1mw	/	29.65		/		kΩ
	Resistance at 250℃	R250	Ta=250±0.05℃ P_T≦0.1mw	/	2.705		/		kΩ
4-2.	B Value	B150/250		5141	5300		5459		k
4-3.	Dissipation Coefficient	σ	In the air	3				/	mw/℃
4-4.	Time constant	τ	In the air	/		/		15	sec
4-5.	Insulation resistance	/	500VDC	100		/		/	MΩ
4-6.	Withstand voltage	/	1500V AC	5		/		/	Sec
4-7.	Operating temp.range	/	/	-30		/		+300	℃

Reliability Test

NO	Item	Technical requirements	Test conditions and method
5-1.	High temp. Test	DR/R25£±3% DB/B£±3% No change with withstand voltage, Insalution performance. Appearance without damage.	105±5℃,1000±24 hrs
5-2.	Low temp. tes		-30±5℃,1000±24 hrs
5-3.	Endure moisture test		Store in environment 65±2℃,90%-95%RH for 1000±24 hrs
5-4.	Temp. cycle test		Place the sample in -30℃ for 10 min, in 25℃ for 10 min and in 100 ℃ for 10 min. and repeat for 5 times.
5-5	Tensile tests	After tensile test, the sensor should be no damage and no falling.zero power resistance change rate should be less than ±1% in 25℃	Clamp wire at 50mm away from the inner edge of the connector terminal, then put 10N static tension between terminal and wire for 1min, along axial direction.after the test, check if there is any borken wire, falling off or damage and measure zero-power re.
5-6	Drop test	No technical damage. zero power resistance change rate should be less than ±1% in 25℃	Drop the sensor from a meter high through axial and lateral direction to cement floor, each direction for 5 times.then check the appearance and measure zero-power resistance in 25℃
5-7	Vibration test		Frequency range:10-500HZ,accelerated speed:10g,frequency sweep time: both X and Y for 30 min.recover for 4 hours after test, visual inspect the appearance of the sensor and measure zero- power resistance in 25℃

6.1 In the process of storage and transportation, per stack height is not more than 4 CTN products.
6.2 Available with all transport method, but avoid the rain, snow of direct or indirect leaching and mechanical damage.

6.3 Products should be stored in the temperature of environment - 10 ℃ / + 40 ℃, relative humidity is not more than 80%, environment should not have acid, alkali and corrosion gas or radioactive source.

Attention on operation

7.1 It will bring extra heat and affect testing precision when the current pass through the sensor, With a view to it before selecting sensor.
7.2 When the product moves, the installation must be handled gently to avoid damage caused by pulling the product.
7.3 Product deformation, oxidation and other phenomena, can not be used, so as not to affect the temperature accuracy.
7.4 Excessive temperature variations should be avoided within the operating temperature range.
7.5 Do not use in corrosive gases (such as CO2,NH3,SOX,NOX, etc.) beyond specified conditions.
7.6 Do not use in electrolysis, salt, acid, alkaline and organic solvents beyond specified conditions.
7.7 In the limit temperature, the product can withstand too high or too low temperature shock in the short term, but can not put the product in the limit temperature for a long time, in order to avoid shortening the service life of the product.

If you need any help, please consult our sales staff or engineers, thank you !

Product Tags: pentair heater stack flue sensor NSAB1802JD8-650T2I pentair pool heater stack flue sensor

Related Products

Customization O Ring Lug NTC Thermistor Surface Temperature Probes 10k 50k 100k for sale


From:	Enter your Email please. Your email is incorrect!
To:	Guangdong Uchi Electronics Co.,Ltd
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

Epoxy Resin Coating Stack Flue Sensor

Epoxy Resin Coating Stack Flue Sensor

Customization O Ring Lug NTC Thermistor Surface Temperature Probes 10k 50k 100k

10mW NTC Temperature Sensor High Temperature Barbecue Food Temperature Probe

PT101 Custom NTC Temperature Sensor Is Suitable For Smart Homes

PT100 NTC Temperature Sensor Is Suitable For Notebook Computers

YF20032 Crimp-sealed NTC Temperature Sensor Is Suitable For Medium And Low Temperature Drying Ovens

LJ21028 Connection-type NTC Temperature Sensor Is Suitable For Thermostatic Toilets