Double faced adhesive tape wireless charging coils assembly
WX5010-6R3K26L for mobile phone and notebook
1.DIMENSIONS(MM)
| A(mm) | 50.0+/-1.0 |
| B (mm) | 20.5+/-0.5 |
| C(mm) | 1.5～3.0 |
| C1(mm) | 26+/-2.0 |
| D(mm) | 5.3+/-0.3 |
| E(mm) | 8.0Ref |
| F(mm) | 2.7Max |
| H(mm) | 43+/-1.0 |
2.MATERIAL:
a. CORE:PC95*1.0 notching "L"
b.WIRE:∮0.08*105P*10.5TS
c.Sn:Sn99.3% Cu:0.7%
d.Yellow adhesive:1603
e.tape maroon mylar tape (8.0mm width)
f.double faced adhesive tape
3.ELECTRICAL DIAGRAM:
4. ELECTRICAL CHAR ACTERISTIC:
| ITEM | SPEC | TEST EQUIPMENT | TEST CONDITION |
| L | 6.3uH+10% | WK5237 OR EQU | 100KHz/0.25V |
| DCR | 60(mΩ)MAX | 502BC | |
| Q Value) | 70 Min | WK5237 OR EQU | 100KHz/0.25V |
5.SPECIFICATION NO:
WX 5010 -6R3 K 26L
① ② ③ ④ ⑤
①Product symbol:
②Dimmensions:
③Inductance : 2R2:2.2μH, R47:0.47μH,310:31uH,501:500uH,152:1.5mH
④Tolerance: J－±5% K－±10% M－±20% N－±30% P－MIN
⑤Length of Lead:06L: 6MM , 26L:26MM |
6.TEST DATA:
| ELECTRICAL CHARACTERISTIC |
| ITEM | L(μH) | DCR(mΩ) | Q | |
| SPEC | 6.3+/-10% | 60MAX | 70 Min | |
| 1 | 6.58 | 36.2 | 99.7 | |
| 2 | 6.54 | 36.1 | 96.6 | |
| 3 | 6.54 | 35.6 | 98.5 | |
| 4 | 6.51 | 36 | 98.6 | |
| 5 | 6.47 | 37 | 98.9 | |
| X | 6.528 | 36.18 | 98.46 | |
| R | 0.11 | 1.4 | 3.1 | |
7.PACKAGING
a.quantity
b.packaing dimensions(mm)
used PE packing
c: Storage
Please be sure to the parts at 35℃or less,70%RH or less,and isolate
the parts from sulphic and chloric atm osphere
8.RELIABILITY TEST
.1.STORAGE TEMPERATURE: | -40℃～85℃ |
.2.OPERATING TEMPERATURE RANGE : | -40℃～+85℃(CONTAIN HEATING COIL) -40℃～+85℃ |
3.EXTERNAL APPEARANCE : | NO EXTERNAL DEFECTS CAN BE FOUND IN THE VISUAL INSPECTION.
|
4. TERMINAL STRENGTH :
| FIXED INDUCTORS,ONE END OF THE ELECTRODE WITH 0.45KG PULLING
FORCE,GUIDED THE NEEDLE DOES NOT FALL OFF. |
5.INSULATING RESISTANCE : | THE INSULATION RESISTANCE SHOULD BE OVER 1000MΩ WHEN D.C.100V IS
APPLIED TO THE WINDING –CORE. MEANWHILE NO STRUCTURE AND ELECTRIC
DEFECTS SHOULD BE FOUND FOR 1 MINUTE. |
6. HUMIDITY TEST : | INDUCTANCE DEVIATION IS WITHIN ±10.0% AND NO STRUCTURE AND ELECTRIC
DEFECTS CAN BE FOUND AFTER 96±2hours TEST UNDER THE CONDITIONOF
RELATIVE HUMIDITY OF 90～95% AND TEMPERATURE OF 40±5℃. AND 1 HOUR
STORAGE UNDER ROOM AMBIENT CONDITIONS AFTER THE DEVICE IS WIPED
WITH DRY CLOTH. |
7. VIBRATION TEST : | INDUCTANCE DEVIATION IS WITHIN ±10.0％ AFTER 1 HOUR SWEEPING
VIBRATION IN EACH THREE DIRECTIONS. NAMELY, FREQUENCY IS10～55Hz
ANDTHE AMPLITUDE OF 1MINUTE CYCLE IS 1.5mm . |
