Offshore Foundation Assemble Fit Up Rotator 2000T Monopile Growing
Welding Roller Bed
Brief introduction:
Monopile growing welding roller bed composed by 1power & 3
hydraulic idler;
Power rotation capacity 2000t; Power & each idler work
load limit 700t/rotator; Suitable for MP size upto 10m;
Specially produced for offshore foundation fit up assembling
growing at dock area.
Description:
- Conventional welding roller bed with reserved screw on pedestal to
adjust wheel center distance fitting for diverse diameter MP
- 2000t monopile growing welding roller bed is composed by 1power
rotator & 3 idler rotator.
- Each idler rotator is with 2pcs hydraulic jacking wheels, via
hydraulic cylinder driven to push up/down the MP;
- With function of idler hydraulic jacking wheel, the monpile growing
welding roller bed could aligning the sections to complete the fit
up procedure.
- Power welding roller bed with motorized trolley. Idler growing
welding roller bed with idler trolley.
- With motorized trolley, it could mobile on the rail for MP
transporting along the rail.
- Extention funciton of linkage control with other equipments,
realize automatic welding of circumferential seam.
- Specially designed for offshore wind power industry, using for type
of offshore foundation.
-
Feature:
- Production according with mechanical standard JB/T 9187-1999.
- Wheel material is 42CrMo fored steel roller, suitable for heavy
duty work piece.
- Special growing welding roller bed using for offshore foundation of
offshore windmill.
- Working with gantry welding manipulator, it is usually for offshore
monopile general assembly/growing at dock area.
- Ground logistic decrease the hoist risk & make the
transportation easy.
- Effectively adjust the monopile sections position to complete the
assembling procedure
- Highly boosting the working efficiency & improve the product
quality.
| Production line | 2000T offshore monopile |
| Composed | 1drive unit + 3idler unit (hydraulic lift) |
| Idler unit model | |
| Max. Loading capacity | 2000Ton (1power & 3idler) |
| Workpiece dia. range | ø3,000~ø10,000mm. |
| Roller type | 1.Steel roller. 2.Diameter 800mm,width 450~800mm. |
| Rotator design length | Max. 7500mm |
| Rotator design width | Max. 4000mm(Contains the width of the moving wheels) |
| Roller center distance | 2100~4500mm |
| The distance between ground and rotator center | 1,850mm ( Return to zero point.) |
| Roller center moving distance and adjustment method | 1.The idler roller seat is fixed by bolts. 2.Adjust the center distance of the roller with bolt holes. 3.Roller seat moving distance is 150mm. |
| Rotator walking method | 1. One unit of rotator is electric walking and the other one is
unpowered walking. 2. When the roller bed is walking, the maximum load is 1000 tons. 3. A group of rotator can move on the track at full load. 4. Electric walking speed is 230mm ~2300 mm/min |
| Rail specification | JRS·JIS 73 Kg |
| Rail inner span and design requirements | 1.The design standard is 3400mm, but a mechanism that can be
converted to 2440 mm is required. 2.Create a manual with the corresponding table of workpiece size,
roller center distance and rotator load. |
| Group pair lifting drive | Hydraulic. |
| Roller lifting and declining stroke | Lifting : 150mm or more Declining: 50mm or more. |
| Hydraulic station | 1.Independent hydraulic station for each rotator. 2.Each hydraulic cylinder is equipped with an independent oil
pressure gauge, and there is a comparison table of
pressure-convertible load, which is recorded in the manual. |
| Rotator control function | 1.Low voltage (24V) wired (30M)/wireless remote control (100M). 2.Control cable length 30m, and must be provided a set control
cable for spare parts. 3.The grounding of the electrical components of the control box
must meet the electrical code requirements. 4.Cylinder lifting stroke and walking control. 5.Stop & E-stop button and synchronized function. 6.The remote control must have the above functions. 7.If the wireless remote control is damaged, it can use the wired
control to operate. 8.Each hydraulic cylinder can operate independently and with
linkage capability |
| Power cable | 1.Voltage 380V/3Ph/60HZ±10%. 2.Cable rack + cable take-up device + 30m flexible cable. 3.European socket (400*4P/63A(3P+E). |
| Cable specification | 1.Flexible cable. 2.Mobile Rubber Cable 600V 2PNCT (EPRN) Insulated Neoprene Cabtye Cover 14mm x 4C. |
| Electronic control part | 1.Hydraulic station and power control box need to be protected. (windproof, dustproof, waterproof) 2.Electronic control box and elements can be fast disassembled. 3.The electronic control box and components need to adapt to the subtropical & island-type climate. 4.Perfect protection circuit (windproof, dustproof, waterproof). |
| Electronic components brand | Schneider |
| Connector brand | Wieland 16pin/24pin. (Explosion-proof ) |
| Transmission & gap protection | Windproof, dustproof, waterproof. |
| Rotator weight and lifting method | 1.The weight of the rotator must be clearly marked on the drawing
and sprayed on the rotator. 2.The rotator needs to provide and set the ideal lifting position
and method and mark it on the drawing |
| Rotator stabilization and anti-roll device | 1.Set holding track device, the design drawings must be provided
and recorded in the manual. 2.A stable device in contact with the ground is required at the
periphery of the rotator. 3.When the rotator is fully loaded and not moving, the rotator can
be stabilized. |
| Linkage between rotator and welder | If necessary, rotator manufacturer should open the roller bed
system and cooperate with the welding manufacturer to integrate
system. |
| Protective | Need to set up a variety of protection devices, such as ELCB,
Electrical fuse, and so on. |
| Maintenance spares | 1.Must be used international label. |
| Paint requirements | 1.All metal surfaces must be sandblasted and painted to SSPC-Sa2.5. 2.Zinc primer coat 1 layer (75 μm / 1 layer) and finish coat 2
layer(250 μm / 2 layer). 3.Paint color: Green - RAL6011. |
Competitive Advantage:
- With lubrication system.
- VFD rotary speed control, improving the reliability of operation.
- Inverter and main electric elements are Siemens/Schneider or equal
brand.
- Accept testing before delivery.
- Accept special design and custom.
Points you may concern:
Customization - Can your machine or other products be customized?
Ronniewell: Sure. As a professional manufacturer, we have our own
engineer team, who is good at design, develop & build special
solution catering for your individual requirement.
Transportation-What about the transportation?
Ronniewell: Seaway is the most common transportation way for
oversea trading. Depends on your location, combined transport by
rail and sea is also an option. Certainly railway transportation is
also acceptable if it is the most suitable approach.
After sale service - What about the after-sale service?
Ronniewell: We provide 12month guaranty period for the whole
machine quality. During this time, any issue proved because of the
machine flaw itself,we would take the whole responsibility of it.
Except of the guaranty period,technical advisory support is
available freely covering the whole using life of the machine.
Engineer service on user premises is also available for necessary.
Video link
https://www.youtube.com/c/RonniewellAutomatedWeldingSolutionProvider
Welcome to follow us on following social media:
Facebook: https://www.facebook.com/weldingrotatorcn
LinkedIn: https://www.linkedin.com/in/automatedwelding
Name of the machine:
welding turning rolls, welding roller, tank turning rolls, pipe
turning rolls, tube turning rolls,fit up rotator, self-aligned
welding turning roll, self-aligning welding turning roll,
self,adjustable welding turning roll, self aligned roller stand,
wheel frame, roller frame for wind tower welding, automatic
adjustable welding pipe rotator, conventional welding,turning roll,
bolt adjustable welding turning roll, sand blasting rotator,
painting rotator,welding turning roll, pipe welding turning roll,
pipe turning rolls, 1+1 hydraulic fit up rotator, two in one fit up
station, offshore foundation, offshore wind power, offshore wind
tower, sucktion bucket, suction bucket jacket, sucktion bucket
fabrication, sucktion bucket production equipment,
