491 - 500 of 826
highway guardrail roll forming machine
Selling leads
|
PPGI, Galvanized Steel Guide Rail Roll Forming Machine With Disk Saw Cutting For Making Shutter Door Slats Description of Shutter Door Slats Guide ...
2024-12-09 17:10:26
|
|
Cable Profile Roll Forming Machine With Punch Machine & Hydraulic Pre-Cutting Device Main Technical Specifications 1. Coil Material: GI or Carbon ...
2024-12-09 17:30:54
|
|
... uncoiling Weight capacity: 5 Ton I.D: 508mm 2). Feeding Guide Two guiding platforms are set at right and left of the feeding entrance of the ...
2024-12-09 17:37:24
|
|
Solar Strut Channel Cold Roll Forming Machine With Servo Feeding Device & Press Punching Machine Main Specifications of Solar Strut Channel Roll ...
2024-12-09 17:33:28
|
|
... Panel Roll Forming Machine With Hydraulic Cutting Device for Standing Seam Roof Wall Cladding A). Main Specification Material thickness: 1mm ...
2024-12-09 11:31:19
|
|
... decoiler Weight capacity of uncoiler: 5 Ton Forming Speed: 6-8m/min Forming Station: 14 stations Drive: Chain transmission Main power: 5.5KW ...
2024-12-09 11:31:19
|
|
... Width: Depend on profile 3. Material Thickness: 1.5-2.0MM 4. Material Yield Strength: 350Mpa Max. 4. Forming Station: 14 5. Forming Speed: 0-20m...
2026-07-08 00:20:22
|
|
... Material Thickness: 1.2-2.0mm Forming Station: About 14 steps Forming Speed: 10-20m/min Shaft Diameter: Φ 70mm Roller Material: High grade 45# ...
2024-12-09 11:41:49
|
|
...Roll Forming Machine For Making C / Z Channel With 1.5-3.0mm Thickness Technical Parameter NO Item Parameter Remark 1 Suitable Type Galvanized Coil ...
2024-12-09 17:23:52
|
|
...Roll Forming Machine For Making Corrugated Sheet Panel With 0.3-0.7mm Thickness Main Specifications No. Item Parameter Remark 1 Suitable Material ...
2024-12-09 17:23:52
|