AC/DC Adapters

Source Factory LC Quad Fiber Optic Adaptor Welded type Asymmetric Structure Detailed Product Description: Product Name Beige LC Quad Welded Fiber Optic Adapter Color Beige Mode Type Singlemode, Multimode Insertion Loss ≤0.2dB Sleeve Pull Force 1-2.5N Durability ≤0.2dB( 500 Times) Operating Temp. -40℃～+80℃ Standards IEC61754-20-2012 / IEC61300 Environmental and Mechanism: Properties Test Condition ... Zhejiang Oryarwa Communication Equipment CO.,LTD Verified Supplierlicense Verified

Asymmetry Structure LC to LC Quad Fiber Optic Coupler Save Installation Space Detailed Product Description: Product Name Beige LC Quad Welded Fiber Optic Adapter Color Beige Mode Type Singlemode, Multimode Insertion Loss ≤0.2dB Sleeve Pull Force 1-2.5N Durability ≤0.2dB( 500 Times) Operating Temp. -40℃～+80℃ Standards IEC61754-20-2012 / IEC61300 Environmental and Mechanism: Properties Test ... Zhejiang Oryarwa Communication Equipment CO.,LTD Verified Supplierlicense Verified

Fiber Optic Adaptor SC Simplex Push-in Type Flange With Inner Shutter Detailed Product Description: Product Name SC Push-in Type Fiber Optic Adaptor with Shutter Color Green/Blue/Beige Mode Type Singlemode, Multimode Insertion Loss ≤0.2dB Sleeve Pull Force 2-5.9N Durability ≤0.2dB( 500 Times) Operating Temp. -40℃～ + 80℃ Standards IEC61754-4-2013 / IEC613000 Environmental and Mechanism: Properties ... Zhejiang Oryarwa Communication Equipment CO.,LTD Verified Supplierlicense Verified

Fiber optic splice closures are made of excellent engineering plastics. Optical Fiber Splice Closure is applied in the junction and protecting of the fiber. It can be suitable for protecting optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects. Features: 1. The box add aging-resistant in imported high ... COMELINK CO.,LTD

FTTH MPO To MPO Fiber Cable Customized Length With Pulling Eye KEXINT FTTH MPO To MPO 12 24 Cores OM3 Fiber Optic Patch Cord Cable With Pulling Eye MTP is the high dense degree of optical fiber pre-connect system, which is generally use in three areas. -The Data Center application with high dense degree environment. -The optical fiber to the building -The internal connector application in fiber ... COMELINK CO.,LTD

Application: 1. Fiber Cable Terminal Metal Splice Closure Joint Box are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. 2. seal the cable, protect the optical fiber splice and storage reserved optical fiber Introduction: Cable Joint Box is designed for splicing ADSS, OPGW cables and the normal cables, including two to four sleeves ... COMELINK CO.,LTD

13Kn Aluminum UPB Universal Pole Bracket Clamp Pole Clamp Bracket Overview The UPB bracket(aluminum alloy pole bracket) is manufactured from aluminium alloy with correspondingly high mechanical strength. Its unique patented design has been developed to propose a universal fitting covering all installation situations on wooden, metal or concrete poles Specification Advantage Installation Our ... Geto telecommunication equipment limited company

Aerial Drop Dire Clamps fastening pole clamp U Span Clamp Description U span clamp Used in drop cable installations as an attachment to the strand for either accepting the bail of drop wire clamps, or for wrapping the support wire of drop cable. Feature Available for steel band range from 12-20mm Special design perfectly matches with pole Made of galvanized steel Easy to operate Specification Name ... Geto telecommunication equipment limited company

ADSS Galvanized Preformed Tension Clamp Preformed Armor Rod Description Preformed Tension Clamp is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines, the reliability and economic performance of the product is better than the bolt type and hydraulic type tension clamp that widely used in the current circuit. Innovative ... Geto telecommunication equipment limited company

Guy Wire Dead-Ends Description Guy wire Dead-ends fix kinds of guy,and it can instead of U-T clamp, wedge clamp etc. Feature a. stress well-proportioned, grip strength not less than 95%(RTS) b. good corrosion c. install easily d. better resist-vibration e, this clamp turning direction is right, if left, please note it in the contract f the clamp can’t be installed in the link fitting which is ... Geto telecommunication equipment limited company

Pole Line Hardware Galvanized Guy Grip Preformed Armor Rod Description The guy grip (FPE)is recommended for the gripping of the steel cable to the pole, where the steel cable itself works as a loop to the pole. Made from galvanized steel wires. An abrasive material applied on its inner side improves the gripping on the cable. Feature a. stress well-proportioned, grip strength not less than 95%(RTS... Geto telecommunication equipment limited company

FTTH ADSS Drop Cable Preformed Dead End Clamp Description ADSS Drop Cable Dead-end is able to secure the soft pliable surface of a drop cable without causing attenuation. Unlike wedge type Dead-ends, the formed wire Dead-end effectively transfers the axial load on the cable at the end of the Dead-end legs to a low uniform radial compression near the dead end loop. This transition of force is ... Geto telecommunication equipment limited company

FTTH ADSS Drop Cable Helical Cable Clamp Tension Clamp Description Tension Clamps are designed to connect ADSS cables and poles/towers. Armor rods can provide protection and cushioning to the ADSS cables. The special design of preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables, so as to ensure the normal lifetime of cables system. Feature Standard design ... Geto telecommunication equipment limited company

FTTH Tangent Suspension Clamp for ADSS Drop Cable Description Tangent suspension clamp is used on Poles/towers with span of less than 100m, and line angle of less than 15° 1. Configuration: Type 1: 1- Anchor shackle: forged steel 2- Housing: aluminum alloy 3- Rubber insert: synthetic rubber 4- Bolt, nut, cotter pin Type 2: 1- Stainless steel band(1.2m) 2- Stainless steel base: 1pcs 3- Rubber ... Geto telecommunication equipment limited company

ADSS Hardware Accessories Preformed Tangent Suspension Set Description Tangent clamp is mainly used to provide protection and installation for small span overhead optical cable. Each set of tangent clamp includes: shell, rubber insert, bolt, nut, washer, etc. Clamp made of aluminium alloy, preformed wire made of aluminium alloy, U-shackles with screw made of iron steel, Rub insert is Neoprene-RE. ... Geto telecommunication equipment limited company

Short Span Fiber ADSS Drop Cable Helical Suspension Set Description Tangent Suspension clamp for ADSS Users can choose other connectors according to the design, such as U-ring, right angle hanging ring And so on. It include less than 100m span tangent suspension clamp and 100m-200m span’s tangent suspension clamp. 1. Configuration: Type 1: 1- Anchor shackle: forged steel 2- Housing: aluminum alloy ... Geto telecommunication equipment limited company

ADSS Hardware Preformed Armour Rods Suspension Clamp Description Preformed Armour Rods Suspension Clamp is intended for use on aluminum based conductors,Aluminum Coated Steel Conductor and galvanize d steel st rands. It is designed to reduce the static and dynamic stresses at the support point,so that the conductor or strand is protected against the effects of oscillations. It also protects the ... Geto telecommunication equipment limited company

Cheapest Spiral Suspension Fittings Preformed Armor Rod Description Spiral suspension device is designed to connect ADSS cable to pole/tower in the straight line. Feature Span length less than 100m Poles/towers with corner angle less than 15° For ADSS cable constructed on poles with 10kv electric power for the city zones. Consist of O-shaped hanging loop,Reinforcing armor rod and dead-end rods ... Geto telecommunication equipment limited company

ISO 9001 ADSS Cable Fitting Helical Spiral Suspension Clamp Description Helical Spiral Suspension Clamp installation is very simple and convenient. The installation operators can install it smoothly by hand without any special tools, and the installation quality also can be ensured. It can be made of galvanized steel or aluminum clad steel. Feature Span length less than 100m Poles/towers with ... Geto telecommunication equipment limited company

Helical ADSS Wire Suspension Set Preformed Armor Rod Description Helical ADSS Wire Suspension Set other called preformed wire suspension grips were developed to secure cable intermediate pole on the central loop routes fiber optical cable line. When the tension strength is high, suspension grip should be applied helical adss grip with splice protector in order to protect fiber core from damaging ... Geto telecommunication equipment limited company