RS232 Interface Surface Roughness Tester SRT-5100 With LCD Display
|
Surface Roughness Tester SRT-5100 Detailed Product Description * This Digital Surface Profile Gauge is a handheld gauge for fast and accurate measurement of the peak-to-valley height of the surface profile of blast cleaned surfaces. * It meets the standards of ASTM D 4417-B, IMO MSC.215(82), SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000. Suitable for the laboratory and for use in harsh field conditions. Accurate, immediate and repeatable results. * The tungsten carbide tip will last for up to 20, 000 readings and can then be easily replaced by the user in the field. * Cost per test is significantly lower than other test methods. * Used the exclusive Micro -computer LSI circuit and crystal time base to offer high accuracy measurement. * Can communicate with PC for recording, printing and analyzing by the optional software and cable for RS232 interface. USB adaptor and Bluetooth interface can also be used. * Automatic power off to conserve power. * Widely used in field of blast cleaned surface measurement. If the profile is too large the amount of coating required to ensure adequate coverage increases, otherwise there is a danger that the peaks remain uncoated - allowing rust spots to occur. If the profile is too small, there maybe an insufficient key to produce adequate adhesion, leading to premature coating failure . Ensuring the correct surface preparation optimises the performance of the coating and material usage. SPECIFICATIONS: Display: LCD Range: 0 μm to 800 μm (0 mils to 30 mils) Accuracy: ±5% or ±5 μm, (whichever is the greater) Resolution: 1 μm (0.1 mils) Metric and Imperial switchable PC interface: RS232C Measurement speed: >30 (readings per minute) Power off : 2 modes (Manual off at any time by depressing the power key till OFF shows on the display or Auto power off after 3 minutes from last key operation.) Weight: 280 g Dimensions: 162×65×28mm (6.38" x 2.55" x 2.10") Operating temperature: 0°C to 50°C (32°F to 120°F) Case: High impact ABS Batteries: 4x1.5v (AAA) battery Standard Accessories of digital surface roughness tester SRT-5100: Main unit……………...1pc. Carrying case…………1 pc. Operation manual…….1 pc. Optional accessories: RS232C cable, USB adaptor, Bluetooth interface |
Product Tags: surface roughness gauge surface roughness meter |
![]() |
Differential Inductive Sensor Surface Tester Roughness Motif Waviness Profile Equipment |
![]() |
Flatness Measuring Surface Roughness Tester Portable |
![]() |
Metric / Imperial Inductance Surface Roughness Instrument SRT-5100S |
![]() |
Lcd Display Bluetooth Surface Roughness Tester ASTMD-4417-B US Navy NSI 009-32 Portable |
![]() |
ISO DIN ANSI Surface Roughness Gauge JIS DSP Chip Control OLED 22 Parameters Ra |
![]() |
Rugged Compact Iso Portable Surface Roughness Tester |