Pipeline Crawler X Ray Machine Emulsion HUATEC Industrial X Ray Film

Pipeline Crawler X-Ray Machineemulsion Film Industrial X-Ray Film D7

SIZE AND PACKAGE

It can be available in other sizes and quantities of packing on request.

REMARK

The unexposed image should be stored in a clean, dust-free, hydrogen free, hydrogen sulfide free and radiation-free place. Heat and humidity have an adverse effect on film. It is recommended to store it in a temperature below 21 ° c and humidity below 65%RH. Ideal storage humidity for opened film is 30%RH-50%RH
 

The film packages should be placed on edge to avoid pressure marking the film.

The film stored in the low temperature should be taken out in advance when using, and stored at room temperature for more than 4 hours before opening the packaging for use, so as to avoid damage to the surface of the film condensation.

The photographic properties of the film will change with the preservation time and should be used within the guarantee period. Exposed film should be processed as soon as possible.
 

The film should be handled carefully to avoid physical damage from extrusion, folding, twisting and friction. Care should also be taken not to touch the film with wet hands before and after processing.

D7 film photosensitive characteristic curve

Industrial x-ray Film D7 is produced by our company, It is designed in accordance with advanced standard. A series of new materials and technology be used from emulsion-marking to coating. It is an ideal film for industrial non-destructive inspect ion photographing.

FEATURES AND USAGES

D7 industrial film adopts blue polyester film as its supporting body, coated with photosensitive emulsion film on both sides. It is a kind of film with fast ray photosensitive speed, micro particles and high contrast. Its fine silver halide crystal particles, good distribution state, specially processed photosensitive coating and reasonable coating structure enable it to have the ability of distinguishing defects with high quality. It is widely used in nondestructive X-ray detection of components, profiles, parts or welds made of ferrous metals, nonferrous metals and their alloys or other materials with smaller decay coefficients.

SAFE ILLUMINATION

This product can be used as a safety light for developing, processing or inspection with lz-2 or No.2 dark red safety light with transparency greater than 630nm. The 15-watt bulb should be at least 1.2 meters away from the film.

PROCESSING

Industrial x-ray Film D7 type industrial amine sheet washing process can be manual washing at room temperature, also can be high temperature machine. The process conditions of manual flushing at room temperature are as follows:

Exposure and flushing conditions:

Storage and shelf life

This film should be stored in a low temperature dry place, the best storage conditions are temperature 10℃ ~ 23℃, relative humidity 30% ~ 65%. Should be strictly avoided in high temperature, high

Stored in wet, radioactive and chemical gases, avoid to store in the same room with processing liquid medicine, and should be used within the validity period, product shelf life of 30 months.

Matters needing attention

1. The film stored at low temperature should be taken out 2 hours in advance before use, and placed at room temperature for more than 2 hours to ensure the temperature of the film and the use environment

The temperature balance is consistent, and then open the film packaging, in order to avoid the formation of water vapor on the surface of the film caused by the adhesion between the films and affect the film picture effect,

To ensure the normal use of film.

2. The film should be unsealed, loaded and rinsed under the safety lamp. The film should not be exposed for too long under the safety lamp

Contaminated film, film should be handled with care to avoid friction. After unsealing, the film should be used up as soon as possible, and the unused film should be sealed according to the original package.

MSDS of HUATEC D7 film

MATERIAL SAFETY DATA SHEET

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

Product Name: industrial radiographic film

Usage: nondestructive test

Manufacturer: HUATEC Group Corporation

Address: 7^th Chengyuan Building B Jiancaicheng zhonglu Haidian Beijing 100096, China

Postcode: 100096

Website: www.huatecgroup.com

Phone Number: 86-10-82921131 13910983110

SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS

This product is a mixture

SECTION 3: HAZARDS IDENTIFICATION

nonflammable, nonexplosive, not corrosive, nonradioactive, no chemical, physical, or biological hazard

Physical hazard: sharp edge may hurt skin

Environment impact: recyclable and nonhazardous

Special hazard: none

SECTION 4: FIRST-AID MEASURES

Skin Contact: nonhazardous

Eye Contact: go to see a doctor if get injured.

Inhalation: N/A

Ingestion: vomit, and go to see a doctor

SECTION 5: FIRE-FIGHTING MEASURES

Danger characteristic:nonflammable, nonexplosive

Hazardous Combustion Products: Carbon oxides, nitrogen oxides

Fire extinguishing agent: Water, powder, Foam, or carbon dioxide

Attention in firefighting: shoot water, or other fire-extinguishing agents, towards the burning material. When fighting the fire, wear protective device as needed to avoid inhaling and/or skin contact with the burning substance or smoke.

SECTION 6: ACCIDENTAL RELEASE MEASURES

The material is solid, so not applicable.

SECTION 7: HANDLING AND STORAGE

Handling: Handling in darkroom only, because the material is photosensitive

Storage: Store in a waterproof, cool, shady dry, well-ventilated place.

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

Control Parameters/Occupational Exposure Limits: none

Engineering Controls: none

Respiration protection: none

Eyes protection: none

Body protection: work cloth

Hand protection: gloves

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

Appearance Physical State: sheets or rolls, thin film when unrolled, weak odor

pH: neutral

Relative Density(water＝1): >1

Viscosity: N/A

Melting Point: N/A

Boiling Point: >100℃

Flash Point: N/A

Explosive Lower Limit: N/A

Explosive Upper Limit: N/A

Vapor Pressure: N/A

Vapor Density: N/A

Solubility in Water: insoluble

Partition Coefficient: N/A

Auto-Ignition Temperature:N/A (nonflammable)

Evaporation Rate:N/A

Decomposition Temperature:Unknown

Recommended Usage: nondestructive test

SECTION 10: STABILITY AND REACTIVITY

Chemical Stability: Stable under normal temperature and pressure.

Reactivity/Incompatible Materials: strong oxidant, strong reductant.

Conditions to avoid: high temperature, sunshine or illumination, damp.

Hazard of polymerization: not polymerized

Products of decomposition: unknown

SECTION 11: TOXICOLOGICAL INFORMATION

Acute Overexposure: unknown

Chronic Overexposure: unknown

SECTION 12: ECOLOGICAL INFORMATION

Eco-toxicity Data: no data available

Biodegradability: no data available

Abiotic degradation: no data available

Biological concentration or accumulation: no data available

Other hazard: no data available

SECTION 13: DISPOSAL CONSIDERATIONS

Classification of wasted material: industrial solid waste

Way of disposal: all the wasted or leftover materials should be collected and disposed according to local regulation

Attention in disposal: keep the material away from water

SECTION 14: TRANSPORT INFORMATION

Number of dangerous goods: N/A

UN Number: None

Packing Group: Ⅲ

Package: internal package is plastic vacuum bags; external package is corrugated cardboard boxes

SECTION 15: REGULATORY INFORMATION

None

SECTION 16: OTHER INFORMATION

Date: Sep. 20, 2019

Department:R&D dept.

Checked by:Safety professional management dept.