Digital Portable Ultrasonic Flaw Detector UT Flaw Detector Auto Calibration
|
Digital Portable DAC, AVG Curves Ultrasonic Flaw Detector / UT Flaw Detector FD350 USM60 USM35
Digital Portable Ultrasonic Flaw Detector, ultrasonic testing equopment, UT flaw detector, ultrasonic detector FD350
Specification:Ranges:0.5 to 10,000 mm (steel) range selectable in fixed steps or continuously variable Material velocity:1,000 to 15,000 m/s,continuously variable in steps of 1 m/s and 22 selectable material velocities Display delay:From -5 to 1,000μs Probe delay:0 to 200 μsAuto calibrationMeasurement and setting of sound velocity and probe delay using two known calibration echoes (2-point calibration) Pulse energy(Spike mode) Low energy (70V) High energy(500V) Square wave excitation pulse (option)Pulse Voltage 20 to 500 V adjustable in 10 V increments Pulse Width Tunable from 20 to 1000 ns in 10 ns increments Damping:Low(50 ohms),:High(500 ohms),(1,000 ohms in TR mode) Pulse repetition frequency:20 to 1K Hz Frequency ranges (-3 dB):0.2 to 1 MHz,0.5 to 4 MHz,2 to 20 MHz Gain: 0 to 110 dB adjustable in selectable steps 0.5, 1.0, 2.0, 6.0, 12.0, user definable, and locked (step 0). RectificationFull-wave, negative half-wave, positive half-wave and RF mode RejectLinear, 0 to 90 % screen height Variable in steps of 1 % Monitor gates2 independent gates in color bar mode, start and width variable over the entire calibration range, response threshold of 5 to 95 % screen height variable in steps of 1 %, AlarmAlarm signal via LED and connectable internal horn. Alarm mode of positive logic, negative logic or DAC ZoomExpands A-scan display area for increased screen resolution. MagnifyExpands area within the selected gate over the entire display range for increased A-scan resolution.
Sound path measurementDigital display of sound path (projection distance, depth) between initial pulse and the first echo in the gate, or between the echoes in the two gates, with selectable echo peak, echo flank or Japanese echo flank detection. Amplitude display In % screen height, dB difference above gate height, dB difference above DAC or TCG dB difference above DGS curve (SDU 35X S) or ERS Displayed readingSound path, (reduced) projection distance, depth, amplitude for every gate, user configurable at four positions of measurement line and of the zoomed display in the A-scan Display5.7 inch LED backlight TFT_LCD Display resolution 320 x 240 pixels A-scan resolution 200 x 220 pixels, 320 x 220 pixels (zoom) A-scan functionsManual or automatic A-scan freeze, A-scan comparison, echo dynamics (envelope), peak echo storage Data memoryMinimum 900 datasets store instrument setups or reports including operation parameters plus A-scan, the stored datasets can be easily previewed, recalled and exported to a computer for edit and printing. Memory can be expanded up to 1900 datasets. DAC / TCGDAC (Distance Amplitude Curves) or TCG (Time Corrected Gain) with a maximum of 16 reference echoes, 4 other curves can be displayed with variable dB intervals. The dB difference between the echo and the recorded DAC curve is measured through gate A. JIS DAC / TCGJIS DAC (Distance Amplitude Curves) with a maximum of 16 reference echoes, 4 other curves can be displayed with variable dB intervals, and 2 other curves can be displayed with constant dB intervals. The dB difference between the echo and the selected DAC curve is measured through gate A. The flaw class is evaluated according to JIS Z3060-2002 AWS D1.1Provides a dynamic reflector indication rating for various AWS weld inspection applications. This allows more efficient inspections by eliminating manual calculations. DGS (Option)DGS curves for single-element and dual-element probes and for all materials, sound attenuation and transfer loss correction, 4 other curves can be displayed with variable dB intervals. Backwall, side drilled hole, flat bottom hole type of the reference reflector are used. Equivalent reflector size, dB difference or height difference is evaluated simultaneously. Units of measurementmm, inch Communication interfaceRS232, bi-directional An USB adaptor cable can be provided to connect the SDU 35X to a computer that does not have RS 232 port Probe connections2 x LEMO 01 big lemo Dialog languagesChinese, German, English, French, Italian, Portuguese, Spanish, Danish, Swedish, Norwegian, Finnish, Czech, Slovenian, Romanian, Dutch, Croatian, Hungarian, Russian, Polish, Slovakian, Japanese, Serb Battery powerLi-ion battery pack (6.6 Ah) Battery life12 hours with Li-ion battery pack Power pack charger operation Via an external power supply (100 to 240 VAC); Operating voltage9 VDC Weight2 kg, including batteries Size177 mm x 255 mm x 51 mm (H x W x D)
Product Info: Main Technical Index:
Standard Delivery of Digital Portable Ultrasonic Flaw Detector
FD350: |
||||||||||||||||||||||||||||||||||||||||||
Product Tags: ultrasonic flaw detectors ultrasonic flaw detection digital ultrasonic flaw detector |
![]() |
Carbon Steel A5 BS2704 Ultrasonic Calibration Blocks |
![]() |
Led Ultrasonic Metal Detector 120db 2000hz Frequency 20mhz |
![]() |
Auto Calibration Ultrasound Flaw Detector IP65 Standard |
![]() |
11 Inch Phased Array Ultrasonic Flaw Detector 800x600 Tft Color Display 16g Memory |
![]() |
Touchscreen Tofd Phased Array Radar Ndt Phased Array Ultrasonic Flaw Detector |
![]() |
DC Distance ASTM E164 OEM Ut Calibration Blocks |