Large Measuring Range Material Hardness Tester With 12 Months Warranty

The latest product hardness tester RHL-100 durometer is equipped with a backlit colour display ndt equipment

The durometer RHL-100 has been developed for hardness measurements on metallic materials. The durometer measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The durometer RHL-100 measures the hardness according to the Leeb rebound principle. An impactor bounces on the workpiece via a firing 
 pin and the metal hardness is measured via the rebound. The RHL-100 durometer is equipped with a backlit colour display.

Likewise, the buttons on the RHL-100 are illuminated. Thus, the display can be read well even in low light conditions. The impact device is connected to the hardness tester via a cable. The durometer RHL-100 has an internal memory of 6 x 100 measurement sets. The memory thus allows a documentation of the measured values. Via the integrated USB and WiFi interface, the measured values can be transferred from the durometer via software to a PC. The durometer is powered by commercially available 1.5V AA batteries and has a battery life of about 50 hours.

- USB and WiFi for data transmission

- Large, bright touch-screen LCD display

- Large measuring range

- Measurement possible in every position

- Hardness scales (HRC, HRB, HV, HB, HS)

- For all metallic materials

Standard Delivery:

1 x Durometer RHL-100
1 x Impactor D
1 x Test block
2 x 1.5V AA batteries
1 x User manual
1 x Carry case