600m 650mm Truck Mounted Water Well Drilling Rig
|
|
600m 650mm Truck Mounted Water Well Drilling Rig Yuchai Borehole Drilling Rig TSJ-600X70 Deep Multi - Function TSJ-600X70 can create drilling jobs in different strata, borehole diameter can up to 500mm . The rig with hydraulic technology, suporting gh torque hydraulic motor rotation and large bore hydraulic cylinder push, the multi cylinder engine of famous factory provides power for the hydraulic system, two stage airfilter, air compressor intake design, prolong the service life of diesel engine. Special pump set design is convenient for maintenance and reduce
the cost of maintenance. Centralized control of the hydraulic
controltable, convenient operation. The Drilling Rig Machine adopts a excavator crawler chassis and has
strong off-road performance. The independent module design allows the drill to be mounted on the
truck to increase its mobility. Two speeds of rotating and advancing speed can meet the different
needs of soil and rock drilling Combined positioner, the
positioning disc can be adjusted and replaced according to
different types of drill pipe and impactor, so as toensure the
accuracy and reliability of the posoning and centering. The hoisting mechanism is convenient for hoisting of drill pipe and
impactor, so as to reduce the labor intensity. This water well rig can be applied to various strata, used in water
well engineering, geothermal well, anchor pile hole and so on, and
can be used with follow-pipe drilling. It has the advantages of whole machine hydraulic control, automatic
loading and unloading drill pipe, crawler type chassis, large
horsepower diesel engine, four hydraulic support leg balance,
stronger terrain application ability and so on. Max Drilling Depth :600m Max Drilling hole diameter:φ500mm Feed / Pulling thrust maximum capacity :35T Feed / Pulling System :Oil cylinder wire rope pull back I SPEED : 16 m/min II SPEED: 24 m/min Oil cylinder double speed mechanism, push and pull speed step less adjustable Rotation Rotation System:gear transmission,step less speed regulating I torque: 7600Nm@55 r/min II torque: 3500Nm @110r/min Engine Power:145KW Speed:2200 r/min (Dongfeng ,Weichai Power Guangxi Yuchai brands ) Hydraulic system rotation: open system, load sensing variable pump, liquid proportion control Push-pull: open system, load sensing variable pump, liquid proportion control Cooling system: air cooling, liquid control Operation room :The operation room is equipped with a built-in working table for separate installation with the host machine. Chassis and drive Crawler chassis: walking speed is 2.5km /h 1.Truck chassis: Shaanxi Automobile Long 8 X 4 (Engine Weichai) 2.Truck chassis: Dongfeng Chenglong 8 X 4 (Engine) The economic speed is 70Km/h The power is about Hp 290 Mast Mast welded structure, mast working Angle 0-- 90° Mast sliding stroke 1000mm Rig winch crane (optional) 3.2T straight arm crane, working radius 6m. Drill pipe Drill pipe length is within 5.5 meters Diameter Φ 89 thread NC31 Clamping system Caliper/shackle clamp: adjustable spacing, accurate, stable, reliable shackle. Automatic centering of shackle and clamping of shackle Jaws clamping spindle torque 9000Nm Jaws reducing spindle torque 18000Nm Wellhead: wellhead hydraulic chuck, through Φ 245 diameter Mud pump (optional) Maximum flow: 600L/min Pressure: 0 to 8 mpa |
| Product Tags: 600m borehole drilling rig 650mm borehole drilling rig yuchai borehole drilling rig |
|
Lightweight 200m 220mm Trailer Mounted Water Well Drilling Rig |
|
600m 650mm Truck Mounted Water Well Drilling Rig |
|
YDL-600DX Crawler Water Well Drilling Rig with 7m Stroke and 600m Depth Capacity |
|
Versatile YDL-280 Water Well Drilling Rig for Deep Boreholes with Multi-Method Capability |
|
300m Borehole Drilling Equipment 85kw |
|
150-400mm 300-400m Deep Borehole Drilling Rig |