Iso9001 Simple Structure Digital Rubber Hardness Tester

Digital Rubber Hardness Tester Shore A/C/D

Shore digital rubber hardness tester is designed for testing the hardness of soft rubber, printer roller and other elastomer material.(ASTM--D--2240). It has advantages of simple structure, convenient use, small body and light weight, intuitive readings. It can carry the hand-held measurements and can also be installed on the same type of fixed cradle which is matched with the set load test.

Introduction

Shore rubber durometer is a type of vulcanized rubber and plastic product . It has A , D , and  C types.

A and D type apply to the test of low and medium hardness and high hardness material C type is suitable for 50% condensation, 0.049MPa Stress , use rubber and plastic togerther, rubber include the shoes cellual material .

The durometer carry out the provision of GB/T531-99, GB2411-80, HG/T2489-93 and JJG304-2003.

Key feature

 Simple structure
 Very convenient to use
 Easy to carry
 ON/OFF Switch
 Holding measured display values
 Zero setting
 Power Supply: one 1.5 V cell battery
 Used to test sof t rubber, prnter roller and other elastomer materials

Specification

Key Parameter

Graduation : 0-100 degree

Indentor running : 0-2:5mm

Indentor press on telos : A , C type 0.55N-8.06N, D type0-44.5N