Iso Digital Shore Hardness Tester Convenient Holding Measured Display Values

Digital Rubber Hardness Tester Shore A/C/D

Shore digital rubber hardness tester is designed for testing the hardness of soft rubber, printer roller and other elastomer material.(ASTM--D--2240). It has advantages of simple structure, convenient use, small body and light weight, intuitive readings. It can carry the hand-held measurements and can also be installed on the same type of fixed cradle which is matched with the set load test.

Key feature

 Simple structure
 Very convenient to use
 Easy to carry
 ON/OFF Switch
 Holding measured display values
 Zero setting
 Power Supply: one 1.5 V cell battery
 Used to test sof t rubber, prnter roller and other elastomer materials

Key Parameter

Graduation: 0-100 degree 

Indentor running:0-2:5mm

Indentor press on telos: A, C type 0.55N-8.06N, D type0-44.5N

Specification

User guide

Make zero before measure it . when durometer press on the glass ,the hand should be on the position of 100 degree. Press the hand several time if it is not on zero or 100 degree.I f ure on the rack, can lift the hand shank,make the durometer under the gravity of the poise , the press part and the table contact completely , the reading should be 100+1(degree), if it is not 100+1(degree),use the hand wheel to adjust it . If it is still not workable. pls send to the manufacturer.