CD400 Supported :
Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.
Digitals: DTCO 1381 (DTCO2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4.
A Workshop Card is required to cluster calibration the digital

CD400 Functions:
W figure determination on measuring track (with optional photo-cell) or rolling road.
K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
Parameter programming.
Activation and deactivation of IMS (Independent Motion Signal).
Activation and deactivation of VDO counter.
reset and (mileage correction).
Speed simulation and customizable automatic test diagram.
DTCS reading (Digital) and erasing.
Sensor pairing (KITAS activation).
Clock test.
Workshop card's PIN recording and input through CD400.

CD400 Advantages:
No power connection nor battery charging required, the only tester powered by the itself.
Compact size, the smallest tester on the market.
User friendly, clear 4 lines menus, no training required.
Automatic model detection on power on.
Double accuracy of the W factor measure on track by detecting half pulses.
The only tester being able to reset the and change the sender type on the VR2400.
Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC.

CD400 Technical Specifications:
Graphic FSTF LCD Display: (100 x 32 pix. / 4 lines x 20 char)
White LED backlight
Size: 150 x 100 x 45 mm
Supply voltage: 9 to 30 VDC
Supply current: 12mA
est: green-blue ABS (IP40).
Operating temp: -20...+70°C
Weight: 155g