XTRUCK Y10 OBD2 Scanner - Fault Code Reader with Freeze Frame Data

XTRUCK Y10 OBD2 Automotive Scanner: Fault Code Read/Clear,

I/M Readiness, Smog Check

OBD2 Scanner Universal Car Diagnostic Tool Fault Code Reader with Reading and Clearing Error Codes Car Engine Check Scanner, Also Freeze Frame Data Display current sensor data including: Engine RPM, Calculated Load Value, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim, Intake Manifold Pressure, Timing Advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor voltages/associated short term fuel.

Simple and super easy to use.

This little device saves you the trips to your mechanic, lets you decide if it's something you can fix or need more advanced help.

Warm Tips:

1. Must be 16 PIN OBD II port;

2. This OBD2 scanner supports petrol vehicles;

3. Where's the OBD II interface?

The OBD 2 port is often under the dash, or under a panel below the handbrake in the center console.

4.How to Use it?

Just simply plug into the OBD II port on your car and turn ignition on then read the car's vehicle information with the reader.

5.Why I can't erase the fault code?

The problem causing the error code must be repaired first then code can disappear.