Reaction Type Francis Hydro Turbine / Francis Water Turbine With Stainless Steel Runner
|
|
Horizontal Francis Hydro Turbine / Francis Water Turbine with Water Head From 20m to 300m
Descrition:
The Francis type turbine is mostly suitable for hydropower stations with medium or high head from 10m to 300m. They are in both vertical or horizontal shaft arrangement and could be vastly selected by the hydraulic power stations. lts feature is that the water flow enters the runner inward in a radial direction , changes direction gradually and then passes out axially. Francis turbine is characterized by reliable operation, simple construction and high efficiency, etc.
This hydraulic turbine type is Horizontal Francis. A inlet valve is
equipped in front of the spiral casing of the turbine. When viewed
at the turbine from the generator end, the rotating direction of
the hydraulic turbine is clockwise .The turbine is horizontal shaft
and metallic spiral casing and the runner diameter is 875mm. This
unit has two bearings, assembled on the generator seat. The
principal parts of the structure of turbine as follows: Spiral case assembly Distributor Rotating parts assembly Inlet tube assembly Draft tube assembly Layout for water,instruments and pipe-line Water flows through penstock of the power station, inlet valve,
expansion pipe, inlet tube, spiral case and wicket gates into the
runner, and then it drives the runner to revolve and convert
hydraulic energy into mechanical energy and drives the rotor of
generator revolution by the force of the main shaft of turbine,
thus converting the mechanical energy into electric energy.
Normally, we adopt the horizontal Francis with capacity below 5MW. And the vertical Francis with capacity below 20MW.
Applications: 1. Water head: from 20m to 300m 2. Power: 100kw to 30Mw 3. Frequency: 50hz or 60hz 4. Output Type: 400V, 3.3KV, 6.3KV, or 10.5KV AC three phase,
If you are interested in the Francis turbine, you should send some key parameters (such as net head, flow discharge, unit number, frequency, voltage) in inquiry. Normally, Medium size and larger Francis turbines are most often arranged with a vertical shaft, Small Francis turbine always arranged with horizontal shaft, but it is not absolute.
Specifications:
Competitive Advantage:
HYDROTU is the complete Chinese hydropower equipment supply, consulting and engineering design venture in the field of hydropower equipment. We provide the high quality Chinese hydropower equipment with advanced technologies and integrated services to meet the global hydropower markets.
|
||||||||||||
| Product Tags: francis water turbine water power turbine hydropower station francis type turbine |
|
Stainless Steel Runner Francis Hydro Turbine with 20-400m Rated Head for Horizontal Shaft Installations |
|
High water Head Francis Turbine with synchronous AC generator |
|
High-Performance Francis Hydro Turbine for Renewable Energy project Needs |
|
Stainless Steel Guide Vane Francis Hydro Turbine with and Rated Power 100-10000kW |
|
Stainless Steel High Water Head Francis Hydro Turbine For Power Plant |
|
Horizontal Shaft Stainless Steel Francis Water Turbine For Capacity Below 20MW |