High-speed Hot Filling Machine , Raspberry / Strawberry Juice Processing Machine

3-in-1 filling monoblock, combined with rinsing, filling and capping. It is innovated and designed in the requirement of non-carbonated energy drinks, juice, tea, on the bases of introducing, digesting and absorbing advanced technology from Germany and Italy. 

Main features 

Rinser 

Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180° Along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high. 

Rinsing machine adopts Sunswell original overturn and double-opened bottle clip. Bottle clip lock the bottleneck, the material of bottle clip is SUS304, which is hygienic and durable. 

Bottle clip equipped with efficient spray on nozzle. The extrusive droplet with 15° Angle ensures to wash all side of the bottle, and can save the water. 

Filler 

The design of filling structure is reasonable and hygiene dead angle, the run of equipment is stable, it can control the material from the bottleneck, the control accuracy is within ± 2mm. 
The filling valve material is SUS304 
The filling system has liquid level automatic control. 
Filling valve lift is controlled by the valve elevator, after filling valve contact the bottleneck, it start to fill. 
Bottle is conveying by the wheel in the filling part. 
The juice or other hot beverage can be backflow by return tank to control filling temperature. 

Capper 

Screw capping machine is most precision part in the 3-1 machine, it has a big influence to the goods stability and defective rate. Our screw capping has following feature. 

Equipment structure 

Base 
Rotary rinser 
Rotary filler 
Rotary capper 
Bottle infeed and outfeed system 
Control 

Main configuration 

Touch screen: THINGET or Weinview 
PLC program controller: Mitsubishi or Omron 
Inverter: Mitsubishi or Omron 
Photoelectrical controller: Omron 
Proximity switch: Omron 
Other electrical components: Schneider 
Pneumatic component: Airtac 
Water pump: Nanfang 
Main motor: Siemens 
Bearing: Harbin 

Technical Parameters 

Working Position: Rinsing 40, filling 40, capping 10 
Rated Capacity: 15, 000BPH (500ml) 
Bottle Size: Diameter 50-96mm; Height 165-310mm 
Air Supply Pressure: 0.7MPa 
Air Consumption: 0.8M3/min 
Rinsing Water Pressure: 0.2-0.25 MPa 
Consumption of Rinsing Water: 3T/hr 
Way of Filling: Gravity Filling 
Main Motor Power: 5.5KW 
Installed Power: 9KW 
Dimension: 4300× 2930× 2750 (L× W× H) 
Weight: 7800Kg