3-in-1 3L 5L 10L 15L Mineral Pure Drinking Water Jar Rinsing
Filling Capping Bottling Machine
Main features
Rinsing part
The Rinsing machine connect with empty bottle conveyor frame, when
empty bottle input rinsing machine extent, through photoelectrical
reaction, Circuit control system command Pneumatic electromagnetic
valve movements, let the Clip bottles of cylinder clip the bottle,
then the oVERTUrn cylinder operate, the bottleneck turn down, then
the pure water pump open, spurt pure water to the bottle, after
30s, stop it, the overturn cylinders reset, input the conveyor
system and go to filling machine.
Filling machine
After-wash empty bottle input the filling machine through conveyor
system, two push-barrel cylinders operate beside conveyor, then the
bottle arrive filling part, the bottle bottom separate the conveyor
belt. After filling, the bottle drop on the conveyor belt. Output
to the capping part.
Screw capping machine
The screw capping machine is made of screw capping heads frame,
after the filled bottle convey to the screw capping machine
station, through air cylinder start to screw cap, again and again,
the finished bottle output to the warehouse and check.
Main Specification
Touch screen: Mitsubishi, Thinget or Weinview
PLC program controller: Mitsubishi or Omron
Inverter: Mitsubishi or Omron
Photoelectrical controller: AUTONICS
Other electrical components: Schneider
Pneumatic component: Airtac
Pump: Nanfang
Technical Parameters:
| Model | Rinsing heads | Filling heads | Capping heads | Capacity[BPH/5L] |
| CGF4-4-1 | 4 | 4 | 1 | 500 |
| CGF6-6-1 | 6 | 6 | 1 | 750 |
| CGF8-8-4 | 8 | 8 | 4 | 1000 |
| CGF10-10-5 | 10 | 10 | 5 | 1200 |
| CGF16-16-4 | 16 | 16 | 4 | 2000 |
| CGF25-25-5 | 25 | 25 | 5 | 3000 |
| CGF32-32-6 | 32 | 32 | 6 | 4000 |
