PLC Programmable Logic Controller IC693CMM321 GE FANUC SERIES 90-30
Ethernet Interface Module
The GE IC693CMM321 Ethernet Interface Module connects any GE Series
90-30 PLC to an Ethernet LAN. The Ethernet interface on the IC693
CMM321 allows for either client or server communication
capabilities.
Older CMM321 modules (version -EF and earlier) communicate via an
external transceiver port on the bottom of the module and an AAUI
cable. The newer IC693CMM321 modules (version -EG and newer) have
an RJ-11 Port right on the front of the module. We can support
either version of the module - please specify which type you prefer
at the time of your order.
The Ethernet Interface module (IC693CMM321) provides an interface
that allows you to attach the
Series 90-30 PLC to an Ethernet LAN via an external transceiver and
AAUI cable, and to
communicate with hosts and other control devices on the network.
The Ethernet Interface for the Series 90-30 PLC has clientrver
capability. As a client it can
initiate communications with other PLCs containing Ethernet
Interfaces. This is done from the
ladder program using the COMMREQ Function Block. As a server it
responds only to requests
from other devices such as a Host computer running a Host
Communications Toolkit application oranother Series 90-30 PLC
acting as a client.
QUICK DETAILS
- Brand :GE
- Model :IC693CMM321
- Place of Origin : USA
DESCRIPTION
The Ethernet Interface allows you to:
- Directly attach your PLC to an Ethernet network
- Initiate transfer of data to the PLC from another device
- Communicate simultaneously to multiple devices with up to 16
server connections
- Interface with other GE Fanuc devices, as well as with devices
from other vendors
- Communicate from a Host computer (or other control device)
- Diagnose and maintain your system using diagnostic and station
management tools
The Ethernet Interface does not support the Series 90-30/20/Micro
Hand-Held Programmer. Eitherone or two Ethernet Interface modules
can be installed in any Series 90-30 baseplate.
The Ethernet Interface connects to an Ethernet network through an
external SQE enabled
transceiver (GE Fanuc catalog no. IC649AEA102 or IC649AEA103 or
equivalent. See Appendix
J). The following figure shows the layout of the Ethernet
Interface.
SIMILAR PRODUCTS
OTHER SUPERIOR PRODUCTS
Yasakawa Motor, Driver SG- Mitsubishi Motor HC-,HA-
Westinghouse Modules 1C-,5X- Emerson VE-,KJ-
Honeywell TC-,TK- Fanuc motor A0-
Rosemount transmitter 3051- Yokogawa transmitter EJA-
