Programmable Composite Salt Spray Test Chamber
Model Number: IE40160L
Product Description and Applications:
The Programmable Composite Salt Spray Test Chamber is designed to simulate and increase the environmental effects on
metal materials exposed to outdoor atmosphere with salt
contamination and accelerated corrosion. The equipment includes
test methods for cyclic exposure of samples to salt spray, dry,
humid and hot environments. The test of this equipment is a
comparative test, and the test results cannot predict the long-term
corrosion resistance of the same metal materials used in this
environmental condition. However, this method can still provide
valuable information about the properties of materials exposed to
salt contamination under conditions similar to those tested.
Compared with the traditional accelerated corrosion test, such as
neutral salt spray test (NSS), acetic acid salt spray test (AASS),
copper accelerated acetic acid salt spray test (CASS), the biggest
advantage of this device test is that it can better reproduce the
corrosion occurring in outdoor salt pollution environment.
At the same time, it is suitable for accelerated corrosion tests,
such as metals and their alloys, metal coatings (anodic and
negative polarity), conversion coatings, anodic oxidation coatings,
organic coatings on metal materials, etc.
Features:
- It can be specially designed according to different customer needs.
- PT100 temperature sensor with high accuracy and low maintenance.
- According to the customer installation site can be manually and
automatically add water, easy to use.
- The greenhouse and the laboratory are independent, and the middle
is connected through the damper control, which has perfect
structure and easier maintenance.
- Energy-saving design, separate control according to different
tests.
- It can do neutral salt spray test, corrosion resistance test, dry
test, wet test, static test, but also can do salt spray, dry and
wet, static mixing test, automatic control.
- Automatic periodic spray, continuous spray, timed spray.
- No need to move the product, you can realize the salt spray, wet
heat, dry automatic cycle test, easy to use
Technical Parameters:
| Model number | IE40160L |
| Temperature range | 0℃ ～ +90℃ |
| Temperature deviation | ±1℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature uniformity | ≦2.0℃ |
| Humidity range | 20~100%R.H |
| Humidity deviation | ±2%R.H |
| Humidity fluctuation | ±2%R.H |
| Humidity uniformity | ±3%R.H |
| Temperature and humidity range | |
| Rate of heating and cooling | RT→+95℃≤50 min. RT→+0℃≤30 min Salt spray (35℃)→ drying (60℃.20~30%RH)≤30 min. Drying (60℃,20~30%RH)→ wetting (50℃,95%+/-5%RH)≤15 min. Wetting (50℃,95%+/-5%RH)→ salt spray (35℃)≤30 min(immediately spray
after switching). |
Test effective inner volume | 800L |
| Interior dimension:WxHxD(mm) | 1600*1000*600 |
| Carton size:WxHxD(mm) | 2780*1450*1450 |
Box structure | Test chamber: imported CPVC polyethylene plate, thickness 8mm,
temperature resistance of about 120 degrees. Outdoor test box: imported CPVC polyethylene plate, thickness 8mm,
temperature resistance of about 120 degrees. Laboratory seal cover: imported CPVC polyethylene plate, thickness
8mm, one-button automatic opening cover, with transparent
observation window, combined with fog removal device, Convenient for clear observation of the test during the test,
temperature resistance of about 120 degrees. |
| Water refill method | Automatic/manual dual water supply mode, automatic water inlet with
a set of water purifier |
| Sample Stand | The inner wall of the CPVC polyvinyl triangle box is placed on the
index frame, and the Angle of the test product can be adjusted
arbitrarily, and the number of test pieces is completely consistent
in the four sides falling fog and receiving fog. CPVC plate punching sample placement platform is set at the bottom
of the test chamber. The uniform opening on the surface of the
platform will quickly discharge the spray liquid, and large samples
can be placed on the table for testing. |
| Refrigeration compressor | France Taikang fully closed compressor |
| Coolants | Non-fluorine environmental refrigerant R404A complies with
environmental regulations and is safe and non-toxic |
| Condenser system | Air-cooled |
Safety protection device | Refrigeration System | Compressor overheat protection Compressor overcurrent protection Compressor overpressure, low pressure protection Condensate fan overheat protection |
| Test Chamber | Adjustable overtemperature protection alarm Air conditioning channel limit overtemperature protection Fan, motor overheat relay protection |
| Heating System | Heating tube dry burning protection Abnormal water supply alarm Abnormal drainage alarm |
| Other | Earth leakage protection Overload and short circuit protection The power supply lacks reverse phase protection function |
| Weight(Kg) | About 600 |
| Power supply | AC380;V50Hz;13KW |
Applicable Standard:
- GB/T20854-2007/ISO14993-2001 Wet and dry salt spray test.
- GB-T5170.8-2008_test method for environmental test equipment for
electrical and electronic products___ Salt spray test equipment.
- GJB150.11A-2009 Military equipment laboratory environmental test
method salt spray test.
- GBT2424.17-2008 salt spray test method.
- GB-T2423.18-2000 Alternating salt spray test method for sodium
chloride.
- GB-T2423.3-2006 (IEC6008-2-78-2001) test cab: constant wet heat
test method.
- GBT2423_4-2008 test method for alternating humidity and heat.
- IEC 60068-2-52-2017 Environmental tests-Part 2-25 Test Kb Cyclic
salt spray (sodium chloride solution).
- IEC 60068-2-11-1982 Electrical Appliance Technology. Basic
environmental test procedures. Part 2: Testing. Section 11: Test
Ka: Salt spray.
Support and Services:
We provide comprehensive technical support and service for Programmable Composite Salt Spray Test Chamber . Our service includes:
- Installation and commissioning services
- Training services
- Repair and maintenance services
- Calibration and certification services
- Application support services
- Support for spare and consumable parts
We are committed to providing a comprehensive service package
tailored to your specific requirements and have established a
customer service network to ensure that you receive quick and
efficient support.
Packing and Shipping:
The Programmable Composite Salt Spray Test Chamber is packaged and shipped in an appropriate sized box and sized foam
insert. All surfaces of the Programmable Composite Salt Spray Test Chamber are secured and cushioned to prevent any movement or damage during
transit. The box is sealed with packing tape and labeled with the
sender's and recipient's address, as well as a brief description of
the product.
