Heater Anti-Burning Protection High And Low Temperature Test
Chamber With Single Door
Programmable Constant Temperature And Humidity Test Chamber
Model:IE10A1225L
Product Description:
The Programmable Constant Temperature And Humidity Test Chamber of constant temperature and humidity box is suitable for
environmental simulation reliability test of industrial products,
with the characteristics of temperature and humidity control
accuracy and wide control range, and the performance indicators
meet the requirements of GB5170.2.3.5.6-95 "Low temperature, high
temperature, constant wet heat, alternating-wet heat test equipment
for environmental test equipment of electrical and electronic
products basic Parameter Verification Method".
Features:
- Energy saving and consumption reduction: Use gas-liquid bypass mode
to adjust the cooling capacity to achieve constant temperature and
humidity
- Easy to operate: programmable color LCD touch controller includes
PID control; Experimental data recording and processing methods are
flexible
- High reliability: The key parts are imported parts to ensure
service life and reliability
Technical Parameters:
| Parameters | Details |
| Model number | IE10A1225L |
| Temperature range | -20℃ ～ +150℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature uniformity | ≦2.0℃ |
| Heating rate | From -20℃ to +100℃ within 40min (no load, ambient temperature +25℃) |
| Cooling rate | From +20℃ to -20℃ within 40min (no load, ambient temperature +25℃) |
| Humidity control range | 20%R.H～98%R.H |
| Humidity deviation | ±3.0％RH(＞75％RH) ±5.0％RH(≤75％RH) |
| Humidity uniformity | ±3.0％RH(no-load) |
| Humidity fluctuation | ±1.0％RH |
| Temperature humidity range | |
Interior dimension:WxHxD(mm) | 500x750x600 |
Carton size :WxHxD(mm) | 720×1650×1370 |
| Warm box | ● External wall material: high quality carbon steel plate, surface
for electrostatic color spray treatment. The left side of the box
is φ50mm diameter hole ● Inner wall material :SUS304# stainless steel plate ●Insulation material: hard polyurethane foam insulation layer +
glass fiber. |
| Box door | For a single door, install a heating wire in the door frame to
prevent condensation in the door frame at low temperature |
Inspection window | The W 300×H 400mm observation window is installed on the door of
the box, and multi-layer hollow electrothermal coated glass can
effectively keep heat and prevent condensation. |
Lighting device | 1 LED lighting device, installed on the window. |
| Sample Stand | Stainless steel sample rack 2 layers, height adjustable, bearing
weight 30kg/ layer. |
| Refrigeration compressor | France Taikang fully closed compressor |
Coolants | Non-fluorine environmental refrigerant R404A, in line with
environmental regulations, safe and non-toxic |
| Condenser system | Air-cooled |
Safety protection device | Heater anti-burning protection; Humidifier anti-burn protection;
Heater overcurrent protection; Humidifier overcurrent protection;
Circulating fan overcurrent overload protection; Compressor high
pressure protection; Compressor overheat protection; Compressor
overcurrent protection; Overvoltage underinverse-phase protection;
Circuit breaker; Leakage protection; Humidifier low water level
protection; Tank low water level warning. |
| Power supply | AC380;V50Hz;6KW |
Applications:
The Programmable Constant Temperature And Humidity Test Chamber suitable for electrical, electronic, mechanical and other products,
parts, materials and other products, high and low temperature, wet
and hot test, simulate the temperature and humidity change
conditions of products, parts, materials and other quality and
reliability test.
Applicable Standard:
- GB-2423.1-2008(IEC68-2-1) Test A: low temperature test method.
- GB-2423.2-2008(IEC68-2-2) test B: high temperature test method.
- GJB360.8-2009(MIL-STD.202F) High temperature life test.
- GJBl50.3-2009(MIL-STD-810D) High temperature test method.
- GJBl50.4-2009(MIL-STD-810D) Low temperature test method.
- GB2423.3-2008(IEC68-2-3) Test Ca: constant wet heat test method.
- GB2423.4-2008(IEC68-2-30) test Db: alternating wet heat test method
- GJBl50.9-2009(MIL-STD-810D) wet heat test method
Support and Services:
At Programmable Constant Temperature And Humidity Test Chamber, we strive to provide the best technical support and service for
our products. Our team of experienced and knowledgeable technical
support professionals is available to assist you with your needs.
Our technical support services include:
- 24/7 technical support via phone, email, and chat
- On-site service and repair
- Product installation and setup
- Troubleshooting and problem solving
- Software and firmware updates
- Product registration and warranty support
Packing and Shipping:
Programmable Constant Temperature And Humidity Test Chamber Packaging and Shipping
- The Programmable Constant Temperature And Humidity Test Chamber will be packed in a solid wooden carton.
- The box will be securely sealed with tape and labeled with the
product name and shipping address.
- The box will be placed inside a larger box for extra protection.
- The box will be shipped using a trusted courier service.
