5 Stations Guided Bending Test Machine High Precision With 7" Touch Panel

5 Stations Guided Bending Test Machine High Precision With 7" Touch Panel

Model: RS-8105A-5

Purpose:

The tester is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short –circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some rotation testing and evaluate the quality of the cable.

Specialties:

 1.To use the Panasonic AC servo motor for driving can guarantee the high precision and lower noise, longer endurance.

 2.To use the high precision photoelectronic switch from AUTONIS for the original point induction.

 3.To adopt MCGS 7" TFT LCD touch screen and the PLC control, English interface.

 4.All the test conditions are set by the touch screen( Angle setting, speed setting, testing cycles, tested cycles, rotation interval time, and so on)

 5.Can test 5 cables at the same time.

 6.There are the signal( conduction testing)cable and the indicator for 5 testing stations, if the tested cable is broken, so the indicator will off and

    stop the cycles counting.

Specification:

Picture:

Service:

For more information, please contact us.

Contacts: Anna Lu

Email: anna.lu@infinity-machine.com

Tel/wechat/whatsapp: +86 18103087812