Button Force Testing Equipment 3 Points / 4 Points Bending Test Machine

Button Force Testing Equipment 3 Points / 4 Points Bending Test Machine

Model: RS-6900H

Application:

This servo control Multi-function tester is controlled by X,Y,Z axes, it is suitable for the button force test, the compression for electronic products, the 3 points bending test, 4points bending test.

Specialties:

1. The tester is moved by X, Y, Z axes, X,Y are to move the testing platform, so that can realize the multi-points compression test for the buttons

    force test and the electronic products compression test; Z axis is connected to the transducer to apply the test force ,collect the test force and

    control the compression time.

2. The system is controlled by computer professional software, can set the test force, test time, test cycles, and test speed, and can collect the

    test force ,test time, test speed to generate the test graph.

3. X,Y,Z axes are driven by servo motor from Japanese Panasonic to drive; transmission by precise ballscrew which can achieve the low noise

    and long durability.

4. The tester is equipped with a controlled box, the operator can also use the box for the tester setting.

5. The tester is table top type, a special table as the accessory.

6. Chinese or English interface can be optional . The unit (N,Lb,gf,kgf) can be switched freely .

7. The testing method can be set, saved and called for use from the saving record . The data and curve can be printed directly

8. The life damping curve can be created, the test report can be converted to Excel and PDF file format.

Technical parameters:

Typical Application:

1. The Multi-points compression:

The test graph. The Y axis is force,(unit can be N,Lb,gf,kgf), the X axis is time, the unit is Second. the setting for below graph is to compress 5kg to keep 5 second at the 5kg force .

The test fixture. The diameter for compression pads will be made according to customer requirement.

2. button force testing:

The test graph for the button test.

The button test fixture.

3. The 3pts and 4pts bending test:

The 4 points bending test is the similar as the 3 Pts bending test, the difference is the fixture. So, here, the 3 Pts bending test will be introduced. There are two ways test for the 3 Pts bending in this tester, one is 3Pts bending fatigue test, and another is the 3 Pts bending strength test.

The 3 Pts bending fatigue test graph. This test graph is similar as the graph in multi-points keep force test.

The similar graph 3P bending strength test.

         The 3 points bending fixture.         The 4 points bending fixture.