1203 Self Aligning Ball Bearing Peek Retainer For High Temperature All Ceramic

Product Description of ceramic self aligning ball bearing:

All-ceramic bearing of ZrO2 materia All ceramic bearing have excellence performance as special electtrcal and magnetism resistance,wear and corrosion resistance ,lubrication and maintenance fiee when working,especially high and low-temperature application.etc.could be used in awful environment and speially condition.The rings and balls made by all-ceramic material :ZrO2,as a standard constructure ,the cage made by PTFE,generally we also could make the cage with GRPA66-25,PEEK,PI,AISI, SUS304 ,SUS316 ,Cu,etc.

The full ceramic ball bearings listed below are supplied with rings and balls made from zirconium dioxide (ZrO2). These zirconia bearings are available as full complement (no cage) or with cages made from PTFE, PEEK or 316 stainless steel.

These are non magnetic, non-conductive and highly corrosion resistant to most chemicals although ZrO2 bearings are not recommended for prolonged contact with steam. Full complement bearings or those with a 316 stainless cage can be used up to 400°C while bearings with a PEEK or PTFE cage can cope with temperatures of up to 250°C. For temperatures below -70°C, PTFE or 316 stainless steel cages are preferred. Standard radial clearance for full ceramic bearings is C0 but other clearances can be supplied to order.

ZrO2 ceramic bearings are generally used for their extreme temperature capabilities, excellent corrosion resistance or non-magnetic properties. Other sizes can be supplied on request.