100W IPG Laser Cleaning Machine for Rust Removal metal surface
derusting
Description:
There is oxidation and corrosion when metals meet oxygen and water
vapor in air. It will greatly damage the metal workpiece and the
rust will spread from outside to inside and become worse and worse
as time goes on, until the whole workpiece is totally corrupted. So
rust removal is extremely important. Laser rust removal uses not
chemical agents or mechanical polishing, so it is faster and safer.
It has advantages of higher efficiency, high automation and no
subsequent processing work, lower labor intensity and lower cost.
QA-LC200 is a 200W fiber laser clean machine for
removing rust on metal surface.
Laser derusting using laser high energy, high frequency, high power
characteristics, the high energy instantly deposited in a small
area, the use of high-temperature oxidation of the oxide layer.
Product features:
1. with the aid of modern means, laser cleaning can easily realize
automatic operation;
2. laser decontamination equipment can be used for a long time;
3. laser cleaning technology is a kind of "green" cleaning process,
the elimination of waste is solid powder, small size, easy to
store, basically no pollution to the environment.
4. it is a "dry" cleaning, do not need cleaning solution or other
chemical solution, will not lead to the two pollution, and
cleanliness is much higher than chemical cleaning process;
5. the laser cleaning technology is very extensive, such as various
oxide particles, rust, coating and organic matter on the surface;
Specifications:
Laser Cleaning Machine Rust Removal.pdf
| Model | QA-LC60 | QA-LC100 | QA-LC200 | QA-LC500 | | Laser source | Fiber | Fiber | Fiber | Fiber | | Laser Power | 60W | 100W | 200W | 500W | | Fiber cable L | 3 M | 3 M | 5 M | 10M | | Pulse Energy | 1.5 mJ | 1.5 mJ | 10 mJ | 50 mJ | | Wavelength | 1060nm | 1060nm | 1060nm | 1060nm | | Frequency | 50-500KHz | 50-200KHz | 20-50KHz | 10-50KHz | | Clean speed | ≤5 M²/Hour | ≤10 M²/Hour | ≤15 M²/Hour | ≤50 M²/Hour | | Scann speed | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s | | Cooling | Air cooling | Air cooling | Water cooling | Water cooling | | Dimension | 450*350*500 | 500*400*550 | 900*600*1100 | 1600*1100*1800 | | Weight | 30Kg | 40Kg | 120Kg | 300Kg | | Beam width | 10-100mm | 10-100mm | 10-100mm | 10-100mm | | Optional | Manual | Manual | Manual | Manual | | Temperature | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ | | Voltage | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ
|
Principle:
1 in the solid surface to produce a mechanical resonance
phenomenon, is the surface of the dirt layer or condensation
debris;
2 the surface dirt layer is heated and expanded, so as to overcome
the adsorption force of the basic material to the dirt particles
and the
Comparison with Traditional Clean Methods: | Comparison | Laser Cleaning | Chemical Cleaning | Mechanical Grinding | Dry ice cleaning | | Method | non-contact cleaning | contact cleaning | Abrasive contact cleaning | non-contact cleaning | | Harm to base material | None | Yes | Yes | None | | Efficiency | High | Low | Low | Mid. | | Consumable | Power | Chemical Detergent | Abrasive paper, grinder, abrasive stone | Dry Ice | | Result | Very good, very clear | Medium, uneven | Medium, uneven | Good, uneven | | Precision | Accuracy controllable. High precision | Uncontrollable, low precision. | Uncontrollable, medium precision. | Uncontrollable, poor precision. | | Safety/Environment | No pollution | Chemical pollution | Dust pollution | No pollution | | Operation | Easy to operate, portable or automation optional. | Complicated process, higher technical requirement of the operator.
Pollution prevention measures required. | Need more time & manpower. Pollution prevention measures
required. | Easy to operate, portable or automatic. | | Investment | High investment on machine. But no consumable, low maintenance cost | Low investment on machine. But expensive consumables | Medium investment on machine. High man-power cost. | Medium investment on machine. High consumable cost. |
Application field:
Industry: widely used in aerospace, mold, microelectronics,
construction, nuclear power plants, automobile manufacturing,
medical, military etc
Presumably, as the demands of the market increasing , the
applications of laser cleaning technolog will be more widely.
Sample details:
FAQ
1 Q: What is the warranty ?
A: The warranty is 2 years, but we offer whole life after-sale
service. Online and overseas service is available.
2 Q: What is your payment term?
A: T/T, L/C, Westen Union, etc.
3 Q: What is your after-sale service?
A: Engineers can offer oversea services and we can also offer
online service.
4 Q: How is the quality of the machine?
A: Germany high technoloy with best quality.
5 Q: How is the operation of the machine?
A: We offer operation manual and videos, show you how to operate
the machine.
We can also send engineers to your factory for training.
|
