Product Description:
The working principle of the electrdynamic vibration exciter is similar to a loudspeaker whereby electrical conductor is moved
by the action of electromagnetic force in the magnetic field. The
force to accelerate the moving part is generated by the balance
between driving current and magnetic flux. Therefore, by
controlling the driving current, one can control of the vibration
generator.
The maximum acceleration level of the electromagnetic vibration
exciter is determined by the maximum current and the load. At low
frequency, displacement of moving part will impose a limitation and
the acceleration will not reach high level. The resonance frequency
of the moving element is set higher than the upper limit of the
frequency range.
The performance of vibration generator can be reflected by the
chart that display the maximum acceleration under different
frequency. By using a log-log plot, the displacement can be
restricted to a linear representation with slope of 6 dB/octave.
Features:
- Rugged suspension system and linear motion guiding, strong carrying
capacity, good guiding functions, high stability
- Load center airbag has high static stiffness and low dynamic
stiffness, strong carrying capacity, perfect performance on
amplitude variation
- High efficiency D class power switching, 3-sigma peak current,
provide finest power consumption and minimize harmonic distortion
- Quick self-diagnosis with safety interlock, high safety reliability
- Airbag shock isolation device for vibration platform without the
need of additional foundation, perfect reproduction of vibrational
wave and reduce vibration transmittance
- Provide horizontal and vertical expansion platform for different
application
- Simple controller operation
Technical Parameters:
Shaker Specifications A20S34 |
Peak Sine (Pk) | 2200Kg.f peak (22KN) |
Random (RMS) | 2200Kg.f r.ms (22KN) @ISO5344 |
Shock (Pk) | 4400Kg.f peak (44KN) @6ms |
Usable Frequency | 1~3000Hz |
Maximum Displacement (p-p) | 51 mm (2 inch) |
Max. velocity | 2m/s |
Max. acceleration | 100g |
Vertical Load Support | 300 kg |
Body Suspension Natural Frequency (Thrust Axis) | Less than 2.5 Hz |
Armature Diameter | Ф342 mm |
Armature Weight | 24 kg |
Fundamental Resonance Frequency (Bare table) | 2,600 Hz (nom.) +/- 5% |
Load Attachment Points (Standard) | 16 stainless steel M10 Inserts |
Stray Flux Density | <10gauss |
Allowable partial force | 500.N.M |
Shaker dimensions | 1050L x 900W x 1040H mm |
Weight of Shaker | About 1960 Kg |
Power Amplifier Specifications LA20K |
Rated Output Capacity | 24 KVA |
Signal to Noise Ratio | Greater than 65 dB |
Amplifier Efficiency | Greater than 90% |
Amplifier Overall Dimensions | 620mmx960mmx1500mm |
Weight of Amplifier | About 460 Kg |
Interlock Protection | ●Input Over/Under Voltage ●Logic Fault ●Output Over Voltage/Current
●Control Power ●External ●Shaker Oil Pressure ●Module O/T ●Shaker
Temp ●Shaker Travel |
Applications:
Vibration test is a process of exciting or
shocking some part or device to observe its reaction in real
environment. Vibration test is widely applied in many fields,
ranging from circuit board, airplane, ship, rocket, missile,
automobile, household appliance and other industrial products.
Labtone can offer you the whole vibration and
testing proposal, and provide you with the quality certificates of
products according to national and international standards,
including GB, GJB, UL, JIS, DIN, ISO, BS, MIL, IEC and ASTM
standards.
Customization:
LABTONE Vibration Test System (EV222)
- Brand Name: LABTONE
- Model Number: EV222
- Place of Origin: CHINA
- Maximum Sine Force: 2200kg.f (22kN)
- Max Acceleration: 92g
- Air Requirement: 0.6 Mpa
- Frequency Range: 1 - 3000 Hz
- Amarture Diameter: 340 Mm
LABTONE EV222 is a Vibration Verification System that provides
reliable and accurate vibration measurement and verification. It
features maximum sine force up to 2200kg.f (22kN) with maximum
acceleration of 92g and air requirement of 0.6 Mpa. It has a
frequency range of 1-3000 Hz and amature diameter of 340 mm.
Support and Services:
Vibration Test System Technical Support and Service
We are committed to providing excellent technical support and
service for our Vibration Test System. Our team is available 24/7
to answer questions, troubleshoot, and provide support for our
product. We also provide a range of services, including
installation, training, and repair. Our team is knowledgeable and
experienced to ensure that our customers get the most out of their
Vibration Test System.
We have a variety of resources to help customers understand and use
the Vibration Test System, including detailed product manuals,
online tutorials, and technical support videos. In addition, our
team regularly hosts webinars and seminars to help customers get
the most out of the Vibration Test System.
We are committed to providing our customers with the best technical
support and service for the Vibration Test System. If you have any
questions or need assistance, please do not hesitate to contact us.
Packing and Shipping:
Packaging and Shipping for Vibration Test System: The Vibration Test System is packed securely in a cardboard box
and is shipped with a tracking number. The box is then placed into
an outer shipping box for additional protection. The outer box is
then sealed with tape to ensure that the contents stay secure
during transit. The package is then shipped via an appropriate
shipping method such as FedEx or UPS.
Customer case:
-
-