Sine and Random Vibration Test System with Controller for MIL-STD 810F

Sine and Random Vibration Test System with Controller for MIL-STD 810F

Introduction:

The purpose of vibration test may be a single vibration environmental function test or vibration durability test, or a number of vibration tests may be carried out simultaneously, such as evaluating the structural strength, evaluating the vibration environmental adaptability of instruments and equipment, and testing the dynamic characteristics of specimens, and the checking the level of process assembly and so on.

Test conditions shall generally include vibration test frequency range, vibration magnitude, vibration duration, vibration direction, vibration type (sinusoidal vibration, random vibration or mixed vibration) and test tolerance limits. Decide whether the test should be carried out in one direction(And, if necessary, the order of tests in the X,Y, and Z directions) or in three directions at the same time.

Meet Standards:

MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc.

Applicable Industries:

Automotive electronics device, Motormeter assembly, Automobile storage battery, Automotive electric equipments, Automotivemotor, Water-soluble dielectric battery, Safety valve, Auto air conditioning compressor etc.

Features:

• Double magnetic circuit structure to ensure high magnetic field intensity & reduce flux leakage; Special degaussing structure can reduce flux leakage to below 1 mt
• U-type spring ,rollers and linear bearing for strong resistance of deflecting load
• Air spring are used for vibration isolation; Vibration system work steadily even with heavy load; no need special foundation
•  Protection devices are provided for over-thermal, over-load, over-current, over-voltage, and over-displacement of the vibration tester; Electrical network protection devices for over-voltage, under-voltage, lacking phase; Drive power , current-limiting , soft-start, over-temperature, short-current,module fault protecting
• Able to complete sine ,random , impact environmental tests
• This system requires voltage fluctuation, ≤±10%
• This system requires Grounding resistance, ≤4Ω
•  High reliability, especially suitable for long-time operation

Detailed Pictures: