Low Frequency Vibraton Test Machine, Simple Shaker Table With PC And Software
|
|
Vibraton Test Table, Simple Shaker Machine with PC and Software
Technical Specifications
Principle Introduction
Mechanical vibration test machine applies to electronic products, components, module, mechanical and electrical products, instruments and meters and other transportation vibration simulation test. It meets the standards of GB, UL, IEC vibration test and reliability test.
Our mechanical vibration table has three testing functions, namely vibration test under particular frequency, frequency sweep test, and multi-stage random test. These three test functions enable users to perform various tests on their products, such as vibration function test, vibration endurance test, package transportation test, resonance search, resonance dwell, stress screening and fatigue test.
Features
Precautions
1. Single phase AC 220V ±10%(50Hz) power supply is employed for the vibration tester table.
2. Adjustment of eccentric block: The eccentric blocks for the machine are of the design of four groups (eight eccentric blocks, 2 blocks form a group). The eccentric blocks on two shafts are in reverse and synchronous rotation. In order to make the table vibrate evenly without shaking, the included angles of eccentric blocks must be the same and located at relative position. A group of eccentric block can be turned to make the direction of opening towards the horizontal left, and the other group must be in the horizontal right direction.
3. The fastening bolts of eccentric blocks must be fixed properly to avoid slipped thread by force.
4. During the adjustment of eccentric blocks, the machine must be at the stop state, and it is better to turn off the machine’s power supply (instead of the computer). The front and rear panels of the eccentric blocks must be fixed before operation.
5. When you hear irregular noise or the machine has severe irregular shaking, it is necessary to shut down the machine and check the machine immediately or notify the supplier.
6. All bolts on the upper part of the vibration table (above the damping spring) cannot be unfastened counterclockwise to avoid damage of the machine.
7. The power supplies for the machine and computer shall be turned off when the vibration table is not in use.
Detailed Picture:
|
||||||||||||||||||||||
| Product Tags: mechanical vibration testing vibration shaker table |
|
Mechanical Vibration Testing Machine Complies With GB UL IEC Standards |
|
Sweep Frequency Laboratory Vibration Tester Machine Suitable For Production Line |
|
Mechanical Vibration Testing Machine , High Load Mechanical Shaker Table |
|
2.5mmp - P Economy Vibration Tester , Mechanical Shaker Table For Products Vertical Vibration Test |
|
Low Cost Vibration Test Machine Mechanical Shaker Table, Laboratory Equipment |
|
Low Frequency Vibraton Test Machine, Simple Shaker Table With PC And Software |