22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008
|
22kN Electrodynamic Vibration Shaker System Conforming to IEC60068-2-27:2008Principle Block Diagram of EquipmentA Vibration Test System consists of four major components (shown in Figure A-1):
Equipment Configuration
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Shaker Specifications | |
| Peak Sine (Pk) | 2400Kg.f peak (24KN) |
| Random (RMS) | 2200Kg.f rms (22KN) @ISO5344 |
| Shock (Pk) | 4400Kg.f peak (44KN) @6ms |
| Usable Frequency | DC～3000Hz |
| Maximum Displacement (p-p) | 51mm (2inch) |
| Max. velocity | 2m/s |
| Max. acceleration | Sine:100g (980 m/s2)；Random: 60g (588 m/s2) |
| Vertical Load Support | 400 kg |
Body Suspension Natural Frequency (Thrust Axis) | Less than 2.5 Hz |
| Armature Diameter | Ф340 mm |
| Armature Weight | About 24kg |
Fundamental Resonance Frequency (Bare table) | 2,600 Hz (nom.) +/- 5% |
Load Attachment Points (Standard) | 21stainless steel M10 Inserts |
| Stray Flux Density | ＜10gauss |
| Allowable partial force | 500.N.M |
| Shaker dimensions | 1190mmL×860mmD×1060mmH |
| Power Amplifier Specifications LA20K | |
| Rated Output Capacity | 22KVA |
| Signal to Noise Ratio | Greater than 65 dB |
| Amplifier Efficiency | Greater than 90% |
| Amplifier Overall Dimensions | 650mmL×920mmD×1780mmH |
Main Features
1) Rugged suspension system and linear motion guiding, strong
carrying capacity, good guiding functions, high stability.
2) Load center airbag with high static stiffness and low dynamic
stiffness, strong carrying capacity, perfect performance on
amplitude variation.
3) High efficiency D class power switching, 3-sigma peak current,
low power consumption and minimum harmonic
distortion.
4) Quick self-diagnosis with safety interlock, high safety
reliability
5) Airbag shock isolation device for vibration platform without the
need of additional foundation, perfect reproduction of vibrational
wave and reduction in vibration transmittance
6) Horizontal and vertical expansion platforms for different
applications
7) Simple controller operation
Customer Services
Presales:
- Technical consultation: test method, laboratory planning and suggestion.
- Equipment selection: selection scheme, FAQ.
- Product testing scheme.
In-Sales:
- Customer communication and progress report.
- Guidance for pre-installation preparation, equipment commissioning and test run.
- Calibration (when Third Party’s verification is required).
After-Sales:
- Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
- Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
- Technical support: special paid services are provided according to customer’s needs.
Detail Images:
|
Sine On Random Vibration Test System For Battery Laboratory Test |
|
High Frequency Electro Dynamic Shaker Vibration Test System |
|
Powerful 340 Mm Amarture Diameter Electrodynamic Shaker Vibration Testing System 50/60Hz Power Supply |
|
3 Axis Vibration Test System With Head Expander Vibration Controller Amplifier |
|
Vibration Test System With 2 Channels Input And Max Acceleration Of 100g |
|
Minitype Shaker Vibration Test System With Amplifier For University Research |