High Performance Vibration Test Machine for MIL-STD 810F G Compliance

The purpose of vibration testing is to make a series of controllable vibration simulations in the lab, no matter generated by natural or man-made vibration environments; such as waves, tidal flaps, wind, earthquake or rain, and so on. It is to test if the product is capable of sustaining the vibration environment exerted from transporting or usage along its effective life cycle and certify the standard of design & functional requirement of the product. The value of vibration testing is to confirm the reliability of products and effectively screen out the bad products in the factory; avoiding damages occurred at arrival; and to assess the failure analysis on the non-performing products; expecting to reach a high standard, high-reliability products. The vibration test stresses the continuity and fatigue; and contributes to the understanding of the product’s status under vibration circumstance in a normal environment, and avoids the product’s unpredictable damage caused under certain vibrating frequency for a long time.

​

Vibration Testing Machine Block Diagram

Typical Vibration Test System

A Vibration Test System consists of four major components (shown in Figure A-1):

1. The Shaker

2. The Power Amplifier

3. The Cooling Blower

4. The Measurement and Control System

a) Accelerometers and Cables

b) Charge Amplifier, depending on which type of Accelerometers.

c) Control System, sometimes including DATA Analysis Software

Features:

The Vibration Testing Machine is associated with the shaker, high power amplifier, and multi-functional controller. If conforms to all military, national and commercial vibration testing specifications and is an essential tool for modernized product design, production, QC & QA work. Using it would make your product be the best. The vibration response bandwidth is big and control precision is high; able to simulate all waveforms and specifications; easy to control; good extendibility and easy to maintain.

• The coil structure earns Taiwan & USA patents.
  The slip table is driven by a linear low-noise hydraulic pump.
  Side & bottom plates are made of cast steel; own the feature of high stiffness and low resonance.
  The machine body is under air-bellow & hydraulic damper protection; no anchor required.
  The machine body is stable and won’t influence floor structure or interfered by external vibration source.

Vibration Testing Machine  service

1,12 months warranty, lifelong maintenance. If any quality problems on our side occurred in this period. we promise we will give you a reply within 48 hours and the solution provide within 3 working days. We can offer operation video and English operation manual. We can provide video-conference. If customers require on-site service,the transport and travel expense shall be borne by the customer.

2, Help choose the right model with a series of service

3, Customization service-OEM, Design service, Buyer label

4, Cooperate with measuring if need the third party verification