ASC-505 Automatic Cutting and Splitting Machine SMT Machine SMT
Splitting Machine
Advantage:
1.The traditional knife type splitter requires manual placement and
positioning, which is time-consuming and labor-intensive, and has
low production efficiency. However, this equipment has been
upgraded from the original knife type splitter, with microcomputer
control. It can set a single cutting stroke according to the size
of the PCB board, without the need for manual positioning. It can
also be connected to the trigger, saving labor, improving the
efficiency of the splitter, and achieving a higher degree of
automation.
2.Due to multiple cuts, the cutting process is very smooth, greatly
improving the positioning ability of the V-CUT slot. Even for
circuit boards with shallow V-CUT slots, there will be no situation
where the V-CUT slot jumps out of the guide knife, avoiding the
production of defective products.
Features:
1.Using microcomputer technology, the program can automatically
control the cutting frequency and cutting stroke. The board width
is 58mm-350mm, controlled by PLC, and can store 100 sets of data;
2.The distance between the upper round knife and the lower straight
knife can be accurately adjusted, and the gap adjustment space
between the upper and lower knife wheels is 0-15mm
3.The distance between the upper round knife and the lower straight
knife can be accurately adjusted, and the gap adjustment space
between the upper and lower knife wheels is 0-15mm
4.Equipped with automatic counting function, visually displaying
output;
5.The machine is driven by a stepper motor and can be unlocked when
powered on; Accurate positioning has solved the problem of changing
the travel point of DC, AC, and motors due to inertia during
operation after a period of time;
